Which Krikit belt gauge for 13 model RT/S?

[3 Wheel Addict]

They make a few different models and I seen on here in a past post that you want the model that goes from 150 to 300 lbs. but don't the 13 model rt's have a higher belt tension? The next krikit up is 300 to 700 lbs. I don't know which one would be the closest to the new belt tension. I seen Lamont marked his with the belt at proper "sonic" tension, that what I want to do as well then have it as a guide for checking.

 

[jcthorne]

They make a few different models and I seen on here in a past post that you want the model that goes from 150 to 300 lbs. but don't the 13 model rt's have a higher belt tension? The next krikit up is 300 to 700 lbs. I don't know which one would be the closest to the new belt tension. I seen Lamont marked his with the belt at proper "sonic" tension, that what I want to do as well then have it as a guide for checking.

You want the one that is 100 to 300lbs. The spec is 1050N which is somewhere around 240lbs.

 

[M109Dreamer]

You want the one that is 100 to 300lbs. The spec is 1050N which is somewhere around 240lbs.

Did the belt tension change again? I thought it was lowered to around 450N?
Which would be around 100 lbs.

Sent from my DROID X2 using Tapatalk 2

 

[jcthorne]

Did the belt tension change again? I thought it was lowered to around 450N?
Which would be around 100 lbs.

Sent from my DROID X2 using Tapatalk 2

Its higher on the 2013 RT and ST. What I would like to know is if one adds a belt tensioner from one of our vendors, can or should the tension be lowered to the old 450N setting?