-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
where is the trailer harness
- Thread starter cuznjohn
- Start date
Pull the plastic cover that is under the seat,on the opposite side of the master cylinder.There is a flip up cover and two wire plugs. The trailer wiring connector is the front plug.Just unplug the harness and plug in your trailer connector and then your 4 wire convertor and your plug that goes down to the rear swing arm. There is a small gap in the the plastic that you can push the wiring through,so no holes drilled and no cutting needed.I used 2 ADEL clamps to attach my wires to the in side of the left saddlebag to keep it off the tire. I used two zip ties to attach it to the swing arm,be sure and leave enough slack for the rear suspension travel. The factory instructions that I recieved were in French and the pictures were useless.They showed taking the whole back end off the machine to run the wires. I installied the trailer wiring harness in about 15 minutes after figuring out that throwing the instructions in the trash can was best theing to do. Also zip tie all of the connector together after plugging them in as I had one come unplugged. causing me to not have trailer lights until I found the connector coming out of the 4 wire adapter did not snap in securely.
Similar threads
