-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
What's your opinion of your F3 Cannonball Seat?
- Thread starter HIspyder
- Start date
bigwhammy
New member
I have the cannonball seat.i like the original better but it comes with a passenger seat that my wife likes better.
the cannonball seat would fit a larger butt better than the original.
so happy wife , happy life. I put up with the cannonball.
The sacrifices us guys have to make...eh?!:bowdown::roflblack:
qasamm
New member
Personally I always found the stock RS and ST seats very uncomfortable. I find Corbin too hard. Straight from the showroom to my garage my F3 was outfitted with the cannonball seat and backrests. I have to say I like it well enough. My wife finds her throne fine and has been on a few 100+ mile runs with me while her RS is in the shop and said she'd be willing to go further. Yes, it was way too expensive but I decided I was going to do all of my major upgrades through the dealer when I bought it and the stock seat was just too "meh".
Sam Mancuso
2015 F3-S and 2009 RS
Sam Mancuso
2015 F3-S and 2009 RS
Cannonball Seat
IMO it's marginally better but not worth the expense. I don't know if the Corbin is better but I do know if you get an Airhawk for about $200 and inflate it correctly for your comfort, being careful to not put a lot of air in it, it will perform better than the Cannonball.
IMO it's marginally better but not worth the expense. I don't know if the Corbin is better but I do know if you get an Airhawk for about $200 and inflate it correctly for your comfort, being careful to not put a lot of air in it, it will perform better than the Cannonball.
jcthorne
Well-known member
I went with a Russel Day long saddle for my F3.
I test rode a Cannonball and it just was not all that much better than the stock seat. I did a gel insert in the stock seat and again, was better but could not ride more than a couple hours without significant discomfort.
I need to post some pics of my RDL but I am VERY happy with the way it looks and feels. Very high quality work too.
I test rode a Cannonball and it just was not all that much better than the stock seat. I did a gel insert in the stock seat and again, was better but could not ride more than a couple hours without significant discomfort.
I need to post some pics of my RDL but I am VERY happy with the way it looks and feels. Very high quality work too.
spydaman60
New member
I have the cannonball seat, and again, it was purchased for the wife's comfort. what people have failed to tell you is that when you get a cannonball seat, the drivers seat is shorter (front to back) and the passenger seat gets elongated to a 2" or greater size. i'm only 5'10" and I have the fifth position linkage for brake and shifter. supposedly I should be riding the third position according to brp. that's how much further forward the cannonball puts you. not really impressed. if ultimate would get off their duffs and put one out there, i'd buy it! had one on the rss and loved it.
Ronbo
New member
Cannonball seat
Ron
I liked mine just fine. It is a bit stiffer than OEM, but is very comfortable. I took it off because I am using. Air hawk now, and it works fine with standard seat. I'm thinking about sellin mine for about $550
Ron
HIspyder
New member
I found a very good deal on eBay which I couldn't pass up, so I've been riding with the cannonball for about 3 months now. I purchased the seat mostly for my wife's comfort as the stock seat has virtually no padding for passenger comfort.
I didn't notice any loss of legroom so when I saw this post, I took some measurements and also rode a few miles with the stock seat reinstalled. After riding with the cannonball, I don't care for the stock seat anymore.
I took a reference point from the handlebar clamp to the back of the drivers seat at the bottom seam and as you can see the difference is only 1/4". The cannonball drivers seat is a bit stiffer and is most definitely wider in the seating area, which I like because it lets be slide back and forth when I lean in on hard fast turns. The passenger seat now has substantial padding for comfort and a nice ridge at the back as well.
I'm happy with it, both for my riding style and my wife's comfort.
Attachments
Last edited:
Mike Ard
New member
I would like to move an inch or so closer to the handlebars and for a minute or so thought that maybe the cannon ball seat would do the trick. If it only moves me a 1/4 inch or so for the price probably won't be cost effective. The cannon ball seat sure seems pretty pricy to try on a whim.
Somewhere I read there was a company that could re do your seat that would move you closer but can't for the life of me remember where I read it. Since my F3 is in hibernation mode right now I could send the stock seat off.
Thanks for posting the pictures with the tape measure. That helps a lot!!
Somewhere I read there was a company that could re do your seat that would move you closer but can't for the life of me remember where I read it. Since my F3 is in hibernation mode right now I could send the stock seat off.
Thanks for posting the pictures with the tape measure. That helps a lot!!
Last edited:
jcthorne
Well-known member
I have the cannon ball seat but I only use the passenger seat...I think ive only used the driver seat a couple of times and went back to the original because it was more comfortable...I agree with the panel its not worth the expense and the comfort of the front seat is only marginal..
Similar threads
