Floridian2017
Member
What kind of cup holder do you have in your Spyder? I have a F3L. Where did you purchase from? If possible, please post a picture. Thank you
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
What kind of Cup holder do you have?
- Thread starter Floridian2017
- Start date
NDrider
Member
Cup holder
I bought the one Lamonster has out but picked it up from spyder pops when they were in Deadwood SD. It comes with a awesome water bottle and my contigo coffee cup fits perfectly. So in the morning coffee then water bottle when I’m done. Look at Lamonsters site to see a short video. I love mine
I bought the one Lamonster has out but picked it up from spyder pops when they were in Deadwood SD. It comes with a awesome water bottle and my contigo coffee cup fits perfectly. So in the morning coffee then water bottle when I’m done. Look at Lamonsters site to see a short video. I love mine
A recent thread on this topic
http://www.spyderlovers.com/forums/showthread.php?114902-cup-holder-for-a-RT-Spyder&highlight=holder
http://www.spyderlovers.com/forums/showthread.php?114902-cup-holder-for-a-RT-Spyder&highlight=holder
Floridian2017
Member
Thank you
cybrj
New member
Spyder2go
https://www.drink2go.com/products/spyder-f3-cup-holder
Works great, 1 screw out and one screw in with sticky washer.
No tipping and you can use a hair dryer or a heat gun to adjust the arms.
Under $20
Jim
https://www.drink2go.com/products/spyder-f3-cup-holder
Works great, 1 screw out and one screw in with sticky washer.
No tipping and you can use a hair dryer or a heat gun to adjust the arms.
Under $20
Jim
NorthAlabamaSpyder
New member
I use the Python mount from Butler with a Yeti 32 oz tumbler in it.
Bigmo
New member
Greatest home made cup holder
Designed to hold a 32oz foam cup from any gas station. Used an old Buttler ring, everything else home made.
Designed to hold a 32oz foam cup from any gas station. Used an old Buttler ring, everything else home made.
Inflatableman
New member
Cup Holder
Lamonster F3 Spyder Cuff with accessories, cup holder and two ram balls. Yeti 30oz is tight getting out, 20 oz fits perfectly.
Lamonster F3 Spyder Cuff with accessories, cup holder and two ram balls. Yeti 30oz is tight getting out, 20 oz fits perfectly.
Lamonster
SpyderLovers Founder
bcer960
Member
lugnut1009
Member
Wanted to share our cup holder, didn't want to make a whole new thread for it. We bought a cup holder form Ciro 3d, the big ass drink holder and the universal mount they sell. Mounted it on the large bar in front of your knee and it works great! Holds anything from a small bottle of water to a large yeti style cup.
Here is a review from youtube that I watched and wanted the holder. Got one for my wife's F3L and one for my Indian Springfield: ASR rides
Kim
Here is a review from youtube that I watched and wanted the holder. Got one for my wife's F3L and one for my Indian Springfield: ASR rides
Kim
lugnut1009
Member
Oh, we were testing her new Lamonster Freedom shield 17" before we took the plastic off....
Motorcycledave
Active member
lugnut1009
Member
My wife likes it. We went for a little ride on the interstate at 70mph and she said she can tell it has way more protection than stock shield. Next weekend we are supposed to take a weekend trip and should have a really good review of it by then.
grumpyoldretiredcop
New member
Generic bicycle water bottle holder attached to a RAM mount that is bolted to Lamont's handlebar top cap. I've used the same or very similar setup for years on different bikes.
ozarkryder
New member
We use Bubba Hero Sport Bottles, either 16, 20 or 24 oz. - we have a few of each size. The Sport Bottle version has a flip-up straw that seals the bottle when closed, and with a straw I don't have to tip it up blocking sightlines when hydrating as we ride. Cold drink and 5 regular size square ice cubes go in the bottle, and here in the Ozarks at 90°F there is still ice gas stop to gas stop. (About 200 miles on the Goldwing trike, haven't done distance in hot weather on the RTL yet)
I have a Lamonster Spyder Cuff with Ram balls to which I mount mine, Gloria's mounts to the rear handhold with a Ram tough claw. I made some cup holders for the Bubba Bottles from 3 1/2" PVC pipe and nylon webbing from Wallyworld - black gear strap from the sporting goods and the pink webbing from a dog leash. Pics below are from the Goldwing, but they go on the Spyder the same way.
I have a Lamonster Spyder Cuff with Ram balls to which I mount mine, Gloria's mounts to the rear handhold with a Ram tough claw. I made some cup holders for the Bubba Bottles from 3 1/2" PVC pipe and nylon webbing from Wallyworld - black gear strap from the sporting goods and the pink webbing from a dog leash. Pics below are from the Goldwing, but they go on the Spyder the same way.
Attachments
Similar threads
