• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

What do you think this noise is?

gkamer

Sadly passed away, December '23.
Listen to the noise my Ryker makes just as it's coming to a stop at this stop sign. Sounds almost like the brakes are sticking. I don't hear it all the time, just off and on.

 
Try to figure out witch wheel it may be coming from and take the brake apart and give it a good cleaning, maybe put a little disk brake paste on the back side of your pads!! Mine squeals a little after I wash it and let it sit for awhile before I ride it, usually go's away after a few stops down the road! Happy Trails!!!:clap:
 
I blow mine out with compressed air from a compressor from time to time. I've done all my bikes like this over the years, you'll be amazed at the amount of brake dust that comes out of there. Also when you replace your brake pads, you should de-glaze & clean the rotors.
 
Could be glazed on pads. Run it up to 30mph and get on the brakes as hard as you can. Do this a couple more times and see if it goes away.
 
Back
Top