On my 2025 spyder rt limited I wired in an innovv power hub 3 along with front and rear dashcams. I added a Carling v1d2 on/off switch with four poles (pole 2 connected to battery, 3 connected to acc wire of power hub 3, and 8 to battery ground) every thing with this is working fine.
Somewhere along the way, I screwed up the switches for heated grips and heated seat. Moving the switch for the heated grips does nothing at all in any position grips will not turn on. If i turn on the heated seat the grips go all in on high but seat heat doesn't work. I can control the heated grips from the display as long as the seat heater switch is off.
To fit the Carling switch in, I disconnected all three of the switches and like a dummy I didn't take a picture before disconnecting. The switches are labeled "1"., "pos1" and "pos3." When I connected them back, I placed "1" for the windscreen switch, "pos1" for the heated grips and "pos3"
for the heated seat.
Does anyone have an idea of what and where I screwed up and how do I fix it? Ready to send it to the dealership to let them fix it.
Thanks In Advance for your suggestions.
Somewhere along the way, I screwed up the switches for heated grips and heated seat. Moving the switch for the heated grips does nothing at all in any position grips will not turn on. If i turn on the heated seat the grips go all in on high but seat heat doesn't work. I can control the heated grips from the display as long as the seat heater switch is off.
To fit the Carling switch in, I disconnected all three of the switches and like a dummy I didn't take a picture before disconnecting. The switches are labeled "1"., "pos1" and "pos3." When I connected them back, I placed "1" for the windscreen switch, "pos1" for the heated grips and "pos3"
for the heated seat.
Does anyone have an idea of what and where I screwed up and how do I fix it? Ready to send it to the dealership to let them fix it.
Thanks In Advance for your suggestions.
