Turn signal not auto-correcting

[PrairieSpyder]

I noticed on my ryde home on Saturday, and since, that the left turn signal doesn't always self-correct like it did before. Could the addition of the Baja Ron anti-sway bar affect that? I mean, could it be that I don't have to correct it as much after a turn that the signal stays on?

 

[spyryder]

Could be your steering angle sensor needs to be recalibrated.

 

[Chupaca]

No way..!!

the sway bar could effect the self canceling feature.. :agree: have sensor checked..good luck..!! :thumbup:

 

[Bob Ledford]

Sounds like another trip to the dealership. But the two should not be directly related.

 

[Bob Denman]

Aren't they supposed to self-cancel after a pre-set length of time? :dontknow:
I'm going to have to do some experimenting with mine today! :shocked:

 

[Elembytes]

They should self-cancel after 30-seconds

Supposed to cancel if you can't cancel it yourself after 30-seconds which to me,I feel is way too long but that is my opinion.

 

[Bob Denman]

30 seconds... :thumbup: I'll check that out today.
thanks!

 

[ARtraveler]

I believe the cancelling feature is time related as well as distance driven :dontknow:

I just give it a one second cancel when it does not go off by itself.

 

[TuckMiddle]

Spray a quick spurt of WD40 and smile smile smile.
Tuck

 

[bertmc]

Me too

I have not gotten mine fixed yet, but here are some additional comments

http://www.spyderlovers.com/forums/...ors-now-needing-multiple-pushes-after-storage

 

[MMcc]

turn signal cancel

The dealer had to replace the switch on my 2011 RTs. Tried the wd-40 route and worked for a short time then became stuck to the left. Had to physically return the button to center each time I used it and then push and hold to turn it off.