• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

turn signal indicators on dash

obiwanbill

New member
tired of the one generic flasher for both sides? I just bought and installed two green LEDs off Ebay. $24.99 + shipping.

You pop off the speedo/tach and the wires for the turnsignals are right there. 4 quick splices and drilling two hole in the dash vents and I was done.

I was having trouble getting the speedo tach off:helpsmilie:...owner of this company in Norwalk Oh, sent me a note via email asking if I got them and did the install go well?:helpsmilie:I wrote him back with not being able to get the speedo/tach off and he gave me his phone number (on a Sunday!) and said he'd walk me thru it(on a Sunday!).

You really have to push down thru those upper slots to pop the plastic spring clips on the tach/speedo. Once that was out of the way, the job was a breeze. It also works with the 4 way flashers and the reverse gear.:2thumbs:

Look up can am spyder---advanced turn signals...he's offering a 5 yr warranty:doorag:
 
I did my dash turn signals a yr. and half ago after continually not self- canceling my signal after a taking a slight turn-off street near my home. I hated that "generic flasher for both sides" :gaah: Mine are the red LEDs and the green LED is wired in to show when the fan turns on.
Your install looks real nice. :2thumbs:

dash1.jpg
 
I did my dash turn signals a yr. and half ago after continually not self- canceling my signal after a taking a slight turn-off street near my home. I hated that "generic flasher for both sides" :gaah: Mine are the red LEDs and the green LED is wired in to show when the fan turns on.
Your install looks real nice. :2thumbs:

How much clearance is there behind the panel just on the lower left and right sides below the gauge cluster? I want to install two 12v cigar aux ports on mine but wasn't sure if there was enough clearance to do so.

I like the light for when the fan kicks on. How did you wire that?

Clean install BTW. :2thumbs:
 
Back
Top