Tricled RT Mirror Turn Signals

[Dan McNally]

I just installed the Tricled turn signals on my RT . . . pretty simple to do, and they look great!

 

[BigJohnP]

I want a pair

Those are the lights I want on my rt. Is there still plenty of room to move the mirror around.

 

[rick_w]

Those are the lights I want on my rt. Is there still plenty of room to move the mirror around.

There is plenty of room. A very easy install on the Mirror LED's. I do suggest just baring the wires and soldering inside the mirror. Putting connectors in there is a little much, just my opinion.
No more trying to see those little green indicators, you can not go wrong on these. They are very bright.
Rick

 

[Dan McNally]

Those are the lights I want on my rt. Is there still plenty of room to move the mirror around.

Yes . . . when you put them on, just don't put them flat against the mirror and you are OK

 

[Bob Denman]

Question: Do you need to drill the housing to run the wiring? :dontknow:

They look GREAT! Those will definitely be going on mine! :2thumbs:

 

[Wiredux]

Those are something I will have to take a look at.

 

[bullant12]

Question: Do you need to drill the housing to run the wiring? :dontknow:

There is some drilling to be done. But it is alot easier than taking the mirrors appart because the chances are you might break a tab and then need new mirrors.
The holes are small and hard to see. Only one on the corner, the rest are on the inside to let the wiring go thru.

 

[cjackg]

 

[jonnysevel]

I just ordered mine 2 days ago! Last weekend I installed the 3rd and 4th brake light kit from tricled

 

[Cruzr Joe]

One reminder ........................... be sure to drill the hole in the correct spot.

check twice ..... drill once.

They are nice lights and work very well.



Cruzr Joe

 

[Bob Denman]

Thanks! I had to drill the housing when I added them to the 2010; I wondered if they had come up with a different way to skin that cat... :thumbup:

 

[Dan McNally]

View attachment 80294View attachment 80295

I like that little convex mirror . . . think I'll get one.

 

[EllijaySpyder]

lights

Once you remove the mirror from the bike do you have to take the mirror apart.

Jerry

 

[samewok]

You do not take the mirror apart.

 

[Grayfox]

mirror leds

Order mine last night.

 

[Cruzr Joe]

You do not take the mirror apart.

Correct, you do not have to disassemble the mirror

Cruzr Joe

 

[Lin]

When I added a short string of LED's on my 2011 RT, I was able to run the wire behind the mirror without drilling a hole.

 

[jwulf74]

View attachment 80363 When I added a short string of LED's on my 2011 RT, I was able to run the wire behind the mirror without drilling a hole.

I tried that method and got close... just couldn't get the wire to go all the way through with what I was using for a guide. I eventually gave up. Might give it a shot again later this winter. What was your trick for feeding the wire through?

 

[Lin]

I tried that method and got close... just couldn't get the wire to go all the way through with what I was using for a guide. I eventually gave up. Might give it a shot again later this winter. What was your trick for feeding the wire through?

I need to recant my previous claim. I just went and took a close look at what I did a year and a half ago. I did drill a 1/8" dia. hole through the black plastic on the side for the wire to pass through.pps: Senior moment!

 

[Bob Denman]

:gaah: For a moment; I thought that you had stumbled upon the "Holy Grail" of Spyder modifications: no-drill additions to the turnsignal system!