Tri-axis handlebar install video series

[finless]

Hi folks.... well as always I shoot video that might help someone.
This time around it is how to install the Tri-Axis handlebars.

1/15/2015 - Edited my RANT commentary... Not needed here...

_____________________


This is a video series (it's 3 parts) I shot showing how to install the Tri-axis handlebars on a RT.

Feel free to ask questions and I will respond.

I hope this video series is helpful to someone AND ENJOY!


PART 1:

Part 2:

Part 3:

I hope these videos help someone!

Enjoy,
Bob

 

[finless]

Tri-Axis Handlebars

DAMN IT... I misspelled handlebars in my thread title...

Lemont does not allow Vbulletin users to edit title threads

I wish I could fix it so it is searchable but alas it is stuck with the misspell

Lemont, can you please edit the title for me?

Bob

 

[Jim&Teresa]

Nice!

Thanks Bob....great job! :firstplace: I wish I would have had your video instructions when I had done mine!!!

This will really help those who want to tackle a job like this!

BTW...I really like our tri axis bars.....no more neck or back pain on long trips as I have the handlebars exactly where I need them!

 

[iSpyder123]

DAMN IT... I misspelled handlebars in my thread title...

Lemont does not allow Vbulletin users to edit title threads

I wish I could fix it so it is searchable but alas it is stuck with the misspell

Lemont, can you please edit the title for me?

Bob

I noticed it's fixed but

Would Edit Thread>Go Advanced work for you?
I checked out a thread I started and saw where I was able to do something to the title.
I never tried it though. I just noticed it to try and help the next person out.

 

[finless]

I have to ask....
Has anyone done this themselves now? Did these videos help?

Reason I ask is somehow Youtube messed them up and they do not play fully. Part 1 wont play for me even when I try to watch it in my Youtube manager. Part 3 wont finish... I complained to Youtube about it but no response.

Honestly, if no one needs these, I don't think I want to spend the time to edit them again and re-upload... Funny not a single person has said anything to me about them not working so I have to assume no one really needs them?

Freakin Youtube.... I am not happy

Bob

 

[SpyderAnn01]

We are swapping out the silver bars for black ones on a friend's Spyder and I thought I would watch this to see what I could learn. I'm hoping that swapping that part out isn't as time consuming as the Tri Axis bars.

 

[stormtrooper]

I will be watching your videos soon as in a few weeks I will be doing the Tri-axis bars on my 2014 RT-S.I will let you know if they help.From what I saw I would assume they will help :yes:

 

[finless]

We are swapping out the silver bars for black ones on a friend's Spyder and I thought I would watch this to see what I could learn. I'm hoping that swapping that part out isn't as time consuming as the Tri Axis bars.

No.... that is super easy to do! You do not have to even go into what it takes to install the tri-axis bars just to replace the covers!

Be ready for the 4 top hex bolts though... My video does cover that.

Bob

 

[finless]

OK I am pretty PC savvy.... but I cannot get part 1 of this video series to play. It did and worked way back when I uploaded it. Now for me, it does not play all the way and in fact dies about 3 minutes in and youtube gives an error.

Can someone else tell me if this is a problem for you?

I have a feeling I have to re-upload these due to youtube screwing them up!

So someone try to play part 1 and let me know.... Then.... if someone needs it to work and it isn't, I will spend the time to do it again.

Bob

 

[pitzerwm]

OK I am pretty PC savvy.... but I cannot get part 1 of this video series to play. It did and worked way back when I uploaded it. Now for me, it does not play all the way and in fact dies about 3 minutes in and youtube gives an error.

Can someone else tell me if this is a problem for you?

I have a feeling I have to re-upload these due to youtube screwing them up!

So someone try to play part 1 and let me know.... Then.... if someone needs it to work and it isn't, I will spend the time to do it again.

Bob

Worked just fine for me. I don't really see any difference in the new handlebars, what is the difference?

 

[stormtrooper]

OK I am pretty PC savvy.... but I cannot get part 1 of this video series to play. It did and worked way back when I uploaded it. Now for me, it does not play all the way and in fact dies about 3 minutes in and youtube gives an error.

Can someone else tell me if this is a problem for you?

I have a feeling I have to re-upload these due to youtube screwing them up!

So someone try to play part 1 and let me know.... Then.... if someone needs it to work and it isn't, I will spend the time to do it again.

Bob

No good for me.Stops and says error :dontknow: I hope you can fix.I plan on watching when I do my bars.

 

[stormtrooper]

Well I did the Tri-axis bars and I would have to say its really not that hard.I do have lots of experience with ripping bikes/Spyders apart so that might have helped.Yes there is a few tricky bolts to do and hope you do not lose them.Overall its not that bad of a job.The videos help for sure because the instructions are really not that great.

 

[Spyder 42]

Hi, Bob. Yes, please keep your videos up. We will have a set on our RT later this spring and I will be the wrench. FWIW, I played the first vid, then paused it to answer the phone. When I came back, the video would not play but the audio did. I believe this is more a function of YouTube and IOS than it is the video itself as I've seen this issue before.

 

[finless]

I am going to try to re-upload part 1 this week. The PC also has an issue with playing part 1 sometimes so it's not just iOS.

Stormtrooper, glad to hear t all went OK! :clap:

Bob

 

[stormtrooper]

Just a heads up.There is a new set of tri-axis bars on E-bay starting bid of $425 plus $12.50 shipping no reserve.Good deal :thumbup:

 

[SpyderAnn01]

Bob, thanks for the video. My girlfriend wanted the stock black bars off my 14 installed on her 12 and Joe and I tackled that last weekend. We had no instructions so your video was really helpful.

 

[IdahoMtnSpyder]

I am going to try to re-upload part 1 this week. The PC also has an issue with playing part 1 sometimes so it's not just iOS.

Stormtrooper, glad to hear t all went OK! :clap:

Bob

When I uploaded a video the other day I saw something about a 15 minute time limit on the video length. Maybe you ran into that as your first two are more than 15 minutes.

I don't know if it's in the video or not but one caution from my experience. Be very careful with the top end of the trunk and glovebox release cables. The ferrule at the top of them is not rugged and is easily broken, and not easy to fix. I had mine changed when the DPS was swapped out.

 

[MisterP]

Thanks, Bob. Your videos convinced me I have no interest in changing handlebars, and I have taken parts of and on the Fat White Chick.

Just not that many at one time...

 

[finless]

Youtube long ago updated my account to 1 hour videos because of how many I have done so no 15 minute issue there.

I complained to Youtube about the issue and it looks like they fixed it. As of this AM I am able to play the video in Chrome, I.E., Android Youtube APP and iPhone Youtube APP.

So looks like they fixed it for me

Ann, glad the video helped!

WasWinger, yes I was aware of your dilemma so was very careful there with the cable. In fact I pointed this out in the video and what had happened to you telling folks to be careful.

MisterP, really not that hard just time consuming. Having the right tools that I outline will keep you from getting hung up.

Bob

 

[Jdsd1]

handlebar

I had the tri-axis installed. I know what the top screws control but what about the bottom one? I try to loosen it but it is extremely tight and I cant get movement. Can you explain? Thanks