trailer wiring

[lmadsen]

I am about to order the BRP trailer hitch for my RTS but have one question that I am not sure of. I have a trailer that has a 4 prong hookup and I want to make sure the wiring harness that comes with the hitch has a 4 prong hookup also. I understand that the BRP manufactured trailer has a 5 prong plug. I just want to make sure that the wiring harness will fit a trailer other then BRP's. When looking at the wiring harness on the BRP website it appears that you have an option of 2 different connections.

Thanks
Larry

 

[Gray Ghost]

When I got my 2013 hitch it came with a 4 wire square plug. You have the option of keeping the square plug on it and making an adapter to go to four wire flat, or just do like I did and change the square plug to a flat so it matches the majority of trailers.

 

[Cruzr Joe]

Any you get from BRP should have the 4 square nowadays.

Cruzr Joe

 

[ursamajor35126]

You can get this adapter from Amazon to adapt your trailer to fit the BRP plug.... That's what I did to adapt my Bustec trailer.

http://www.amazon.com/dp/B004BE60ZU/ref=pe_385040_127541850_TE_item

 

[trikermutha]

you want 4 flat or 4 square..BP sells both..expensive tho..

they changed the 5 round I believe on the 2013 on up models

 

[mastertek2000]

this is the one you need great quality cheap to
http://www.delcity.net/store/4!Way-Square-Connector/p_8892

 

[Deeprzymus]

adapter plug (4 square to 4 flat)

We have a BPR hitch and a trailer built by Mini Trailer USA. We contacted Ricky about the adapter. They are now making the adapter plug (4 square to 4 flat). Cost I believe to be between $20 to $30, but check with Ricky.

Our adapter is on its way...

Ricky Wright
Mini Trailer USA. 8221 East 9th Street
Cushing, Ok 74023

Office: 918-225-0708p
Cell:918-256-6084
Email: [email protected]
Web-site: http://motorcycletrailers.us/
Check Us Out & Like Us On Facebook : https://www.facebook.com/RCOFabrication