• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Trailer Wiring

C

cobraswinger

New member
I just purchased a dart trailer for my 2017 F3 T and I am wondering what I am going to need to be able to run my lights. I still have to buy the hitch and the controller but what else do I need ? I know that the trailer has a flat 5 pin connector. Any insight would be great.
 
you need to install a 4way isolator and i'll tell you tomorrow what else needs removing couple of plug and plays just forgot which ones ha ve to look and see
 
what else ?

sylvester said:
you need to install a 4way isolator and i'll tell you tomorrow what else needs removing couple of plug and plays just forgot which ones ha ve to look and see
Click to expand...

I received my hitch today and as I suspected the directions are next to useless. Do I need to remove the passenger backrest and the plastic piece under it to get to where I need to be ? I also think that I need to remove the rear fender (2 pieces ) as well ?? I have been told that I need a converter to go from 4 wires to 5 ??
 
don't know about removal of the tupperware but you really don't need the 4 to 5 converter just the 4 isolator , now my brother did both 4 way isolator and the 4-5 converter i did not works fine
 
cobraswinger said:
I received my hitch today and as I suspected the directions are next to useless. Do I need to remove the passenger backrest and the plastic piece under it to get to where I need to be ? I also think that I need to remove the rear fender (2 pieces ) as well ?? I have been told that I need a converter to go from 4 wires to 5 ??
Click to expand...
Did you get BRP's hitch or someone elses? If you got BRP's then you might want to consider getting this for the trailer.

https://leadersrpmshop.com/can-am-new-oem-spyder-roadster-trailer-tongue-harness-rt-622-710003227/

Currently this place is out of stock. You'll have to find it some place else. And you'll have to get it wired into the trailer so it will plug right into BRP's plug.
 
Last edited:
You must log in or register to reply here.

Similar threads

T
Looking for 2022 and 2016 F3 Ltd top case wiring diagrams - anyone? Can't get rear Speakers or Brake Lights to work...
Replies
2
Views
152
cmarsala
cmarsala
Poppie65
Installed some trailer cargo lights in our Time Out Trailer
Replies
0
Views
119
Poppie65
Poppie65
jzeiler
How I connected my 2024 RTL to a Bushtec Trailer with independent Tail, Brake and Turn signals
Replies
2
Views
263
safecracker
safecracker
Davgill2002
BRP 2020 plus 4 pin Trailer wiring harness & Bushtec Turbo II 6 pin Trailer harness
Replies
0
Views
607
Davgill2002
Davgill2002
A
What Trailer hitch and wiring harness are you using for your RS Spyder?
Replies
6
Views
324
ned64
N
Back
Top