I have an F3T Limited and a Bushtec trailer. I'm looking to buy an after market hitch and harness. Trailer has a 6 way flat connector while I THINK the spyder plug and play is a 4 way flat. Does anyone know of an adapter? Bushtec said they do not have one. I have checked on line and can not find one either.
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Trailer harness adapter
- Thread starter jlwhite
- Start date
sylvester
New member
I have a bushtec wired. Look up www.electricalconnection.com they will make you what you need. You will not be able to have a 6 plug connection 5 max the 6th one is for the inside trl light. you need to buy a 4 to 5 converter new isolator to match and leave out the BRP 2 to 3 harness not needed. I bought BRP's trl hitch removed the ball depending on what receiver hitch you had , I had a wing with slide in . I cut the square piece off and welded the pin with bar to the BRP hitch, hope this helps . I have a !7 F-3 T limited
Last edited:
Similar threads
