Rogue Hawk
Active member
Does such beastie's exist yet? Getting on with a back rest would also be nice.
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Top cases that don't interfear with the passanger
- Thread starter Rogue Hawk
- Start date
Rogue Hawk
Active member
Maybe something like this. It would be good to have a higher stop light.
http://giviusa.com/givi-products/cases/monokey-cases/v46nfa-46ltr-matte-black-case-detail
http://giviusa.com/givi-products/cases/monokey-cases/v46nfa-46ltr-matte-black-case-detail
Only question would be - would the mounts be happy with more weight that far back given the Max Mount itself is kind of "floating" already. I'm sure it would be fine without a passenger, but with I may start to get concerned (depending on the load in the case of course).
Just food for thought.
Just food for thought.
chris56
Active member
I use for my 900 this here - black painted lid / backrest / to close with a key !! / and the possibility for LED stoplight on the back / 31 Liter ..
& just get a U-formed aluminium plate over the max-Mount to make it longer .. very easy solution - should be finished next week ..
the passenger seat will be a flat GEL-cushion wider than the original ..
BUT !! seems that we are more a lightly weighty couple :thumbup::thumbup:
& just get a U-formed aluminium plate over the max-Mount to make it longer .. very easy solution - should be finished next week ..
the passenger seat will be a flat GEL-cushion wider than the original ..
BUT !! seems that we are more a lightly weighty couple :thumbup::thumbup:
Attachments
WilliamTRyker
New member
Is that a Peugeot Scooter Top Case?
Also, where would you "just get a U-formed aluminum plate" ?
chris56
Active member
the plate is made from a metall company here - yes a"scooter" case - here is another (French) idea to fix a topcase behind the passenger but I`m not shure if that ist strong enough but very "elegant" ..
Rogue Hawk
Active member
That is what I have in mind. Does Can AM sell that mount? All I have seen is the top case that replaces the passenger seat.
Rogue Hawk
Active member
chris56
Active member
Attachments
chris56
Active member
did more tan 62.000 kms on "Spyders" .. now I love the drive-shaft !!! and the CVT gearbox - together thats 100% more for touring here in the Alps than any of the old Modells - the power and the speed is OK for me
That is a great job, really looks nice, Chris56. :clap::2thumbs:
Rogue Hawk
Active member
Did you fashion the back plate where the case sits yourself? I am note a mechanic, so would you post a step by step "how to"? Also, where did you get that great windscreen?
chris56
Active member
First - if you want to install a "better" shield, you have to cut the lid of the glovebox - without that its not possible to fix it in good looking and aerodynamic way & if it is fixed too high looks "crazy" .. the shield is only fixed on the handlebars (5minutes)
so I cutted it - made a rubber-seal (from a window) and now waiting for a "Lock" system from SHAD - only one key for the glovebax and the side case ..
I use this smaller PUIG in the moment .. but you could then also use also the wider ones ..
https://puig.tv/en/tuning-motos/carenabrises-universales-para-faros-no-redondos/windshield-upampdown
the new Aluminium plate for a topcase (mine one is from a peugeot-scooter) is lying "over" the maxmount and makes it 12 Inch "longer it has the "form" of the max-mount and should be fixed with screws to a second plate under the max-mount- I wanted a case with a backrest and a black paintet lid (triple-black-ryky), also some Red Lines on it (maybe with LEDs on the End) - you could use also a SHAD if you want..
Direkt on the plate with the caseholder is now the seat-pad - as low as possible - she does not want to seat so much higher than me.
.. ordered now black metal handlebars from a KTM-Bike .. the prices for these adds on where around ..
Shield ..150,-
komplete Alu-plate with Seatpad - 400,-
Topcase with mountplate - 200,-
https://www.youtube.com/watch?v=7CBuXwN06J8&t=65s
https://www.sattlerei-wakolbinger.at/motorradsattel/
so I cutted it - made a rubber-seal (from a window) and now waiting for a "Lock" system from SHAD - only one key for the glovebax and the side case ..
I use this smaller PUIG in the moment .. but you could then also use also the wider ones ..
https://puig.tv/en/tuning-motos/carenabrises-universales-para-faros-no-redondos/windshield-upampdown
the new Aluminium plate for a topcase (mine one is from a peugeot-scooter) is lying "over" the maxmount and makes it 12 Inch "longer it has the "form" of the max-mount and should be fixed with screws to a second plate under the max-mount- I wanted a case with a backrest and a black paintet lid (triple-black-ryky), also some Red Lines on it (maybe with LEDs on the End) - you could use also a SHAD if you want..
Direkt on the plate with the caseholder is now the seat-pad - as low as possible - she does not want to seat so much higher than me.
.. ordered now black metal handlebars from a KTM-Bike .. the prices for these adds on where around ..
Shield ..150,-
komplete Alu-plate with Seatpad - 400,-
Topcase with mountplate - 200,-
https://www.youtube.com/watch?v=7CBuXwN06J8&t=65s
https://www.sattlerei-wakolbinger.at/motorradsattel/
Attachments
Rogue Hawk
Active member
Thanks for the info, Chris. You certainly are imaginative. 
Similar threads
