Took off 2 bros JB now sputters in first

[BLUEKNIGHT911]

CODES

While the JB was on and it would idle fine until it would goto limp mode no codes
would come up. Took off the JB and NOW it idles rough BUT atleast it has speed and will do 80mph instead of 50. So the 6 screws around the intake in the air box maybe the issue? Guess I need to re look at those. Never had I had anything with so much issues. And where are these vacuum hoses you keep talking about? It runs fine I guess until low rpms

" Limp-mode " is something that will show on the screen Automatically ..... 99% of CODES won't .... you have to ask the computer to show them ...... Sorry but I have forgotten the button sequencing ( pressing which ones in what order ) to bring them up ...... someone here will assist on that ...... Not likely the screws imho ..... Mike :thumbup:

 

[Stridersr7]

" Limp-mode " is something that will show on the screen Automatically ..... 99% of CODES won't .... you have to ask the computer to show them ...... Sorry but I have forgotten the button sequencing ( pressing which ones in what order ) to bring them up ...... someone here will assist on that ...... Not likely the screws imho ..... Mike :thumbup:

Well when it would only go 50 I figured it was limp mode because it would run off one cylinder. But who knows maybe that was a foules plug. But yes it never said limp mode and when I did the thing for codes nothing came up. Anyways. Anybody have pix of what these vacuum hoses look like and where

 

[Stridersr7]

So this is my question. Let’s say it’s a small air leak and as you see run crappy at idle. Would it hurt it to just ride it?

 

[Stridersr7]

Come to think of it. I do remember a tiny hose that wasn’t connected. There were 2 of them. I reconnected it back though. Gonna go double check on it but not today. Today is a lazy day

 

[BLUEKNIGHT911]

SAFE TO RIDE

So this is my question. Let’s say it’s a small air leak and as you see run crappy at idle. Would it hurt it to just ride it?

I'm pretty sure it wouldn't damage anything, but in an Emergency while driving you wouldn't want the Spyder to NOT perform, ie passing situation :banghead::banghead::banghead: ..... Mike :thumbup:

 

[BLUEKNIGHT911]

SPUTTERING

Come to think of it. I do remember a tiny hose that wasn’t connected. There were 2 of them. I reconnected it back though. Gonna go double check on it but not today. Today is a lazy day

" Bingo " I think you found the answer ......... and I'm sure you just found one of those Hoses you need to change to Silicone ones :clap::clap::clap:because they may be OK , but they are going to FAIL in the near future .............. keep us in the loop .....Mike :thumbup:

 

[Stridersr7]

I'm pretty sure it wouldn't damage anything, but in an Emergency while driving you wouldn't want the Spyder to NOT perform, ie passing situation :banghead::banghead::banghead: ..... Mike :thumbup:

Indeed. So the 2 vacuum hoses. Are they the ones that are a few inches long and the both connect into the same spot on both sides?