Still waiting for a major change to the RT

[eddieshep999]

Honda usually bring out Anniversary models, usually followed by updates to the new ones
As we have now had the Can Am 10yr Anniversary models, the time would be right for them to update one especially the RT
Honda have several DCT automatic Motorcycles inc the New 1800 Gold Wing which has shaft drive
If they built a Trike based on it, existing Spyder owners may be tempted if Can Am still only offer the 1330 Spyder with belt drive
The new Ryker models uses the ACE derived engines from the Snowmobiles/Skidoos they already have a 1600 ACE engine and the Ryker now comes with shaft drive so it’s not impossible for BRP to consider baseing the new upgrade on a New Spyder utilising this technology

 

[scarecrow]

Shaftdrive and larger top load saddle bags for me.

 

[Bob Denman]

I was joking my friend, the Slingshot with shafts, belts and more has a single rear tire last I looked.

Just like our Spyder, it has a posi rear end...unless like some, the pulley splines implode.

I know: so was I! :roflblack: :thumbup:

For the Record; here's proof:

 

[trikermutha]

Someday I want to test the Posi-Trac system. :clap:

 

[Wildrice]

Since the Ryker has a driveshaft: the other bikes will get it next. :thumbup:
Three years... TOPS! nojoke

Driveshafts consume more power--but it would be worth the belt adjusting grief.
Darrell

 

[IdahoMtnSpyder]

:roflblack: The Slingshot is already a shaftie…

Funny looking shaft drive!!! :roflblack:

 

[trikermutha]

Funny looking shaft drive!!! :roflblack:
View attachment 165797

Read post 23

 

[Nik]

I saw the gold wing now has DCT (Had the vfr with DCT) and they came out with a trike conversion for the new goldwing....it has me thinking

 

[Bob Denman]

Driveshafts consume more power--but it would be worth the belt adjusting grief.
Darrell

Well now THAT'S the beauty of the Slingshot: you get the worst of both Worlds.

Belt adjustments, AND parasitic power loss! :roflblack:

 

[burg650]

So you want bigger engine more power and drive shaft, so shock would need upgraded as well maybe plus new frame to handle the bigger more power. So are all ready to end up paying over $50 grand if you spec it out, goldwing trike sure sound better at this price point.

 

[SpyderBears]

Completely agree!!

Only if it's a reverse trike.. most of us Spyder owners understand and appreciate the reverse trike configuration which is far superior to conventional trikes.

But if Honda were to do a reverse trike with the right specs I'd have to seriously consider getting one.

 

[NuttyBuckeye]

+1 on the driveshaft. I loved them on my Shadow, Vulcan, and Valkyries. The 1330 really needs to jump the horsepower a bit also. I have noticed two-up passing or passing with a trailer can become a dancing act with the trans. More than once I have said to myself when passing, "Come on, come on, oh crap!" LOL

Have you tried leaning forward? Just kidding.

 

[C. Lee]

I would like to see shaft drive, better radio and helmet storage. Other then that I'm very happy with my rtl. Chris

 

[Fat Baxter]

One of the challenges with periodic body style updates and drive train changes is that it creates problems in the dealer's supply chain to keep up with all the changes. Also, if you're one who keeps his machine for a long time and the marque refreshes its product line periodically, you will eventually run into a parts availability problem. And not only do parts get harder and harder to find, but their price goes up as well.

So from a long-term cost-of-ownership perspective, it's best if the company keeps the same body style and drivetrain for a good length of time. Think of Ford's Crown Vic.

 

[PMK]

Have you tried leaning forward? Just kidding.

Yes, leaning forward helps...

 

[PMK]

One of the challenges with periodic body style updates and drive train changes is that it creates problems in the dealer's supply chain to keep up with all the changes. Also, if you're one who keeps his machine for a long time and the marque refreshes its product line periodically, you will eventually run into a parts availability problem. And not only do parts get harder and harder to find, but their price goes up as well.

So from a long-term cost-of-ownership perspective, it's best if the company keeps the same body style and drivetrain for a good length of time. Think of Ford's Crown Vic.

Or the rumored 1960s Ford Falcons they still make in South America...

 

[tennhillbilly]

I personally think that if Honda would make a factory three wheeler , Can Am would loose a lot of customers . :joke:

Google the Honda Neowing 3 wheeler.

 

[amcvay1979]

They need a total re-design of the RT. It's a dinosaur at this point compared to the F3. The riding position is too upright, not enough adjustability. Floor boards slope downward, so you're always on the balls of your feet, at least I am. $700 if you want to adjust the handlebars, that's without labor, etc.

I agree, power should be increased. It's quick, but it's also heavy so more HP would be a welcome addition. I'd also like to see much more exhaust options. The RT is more of a quiet cruiser and that's fine, but 1 slip on can for $1000 doesn't sit well with me. Yes there's aftermarket, but come on Can-AM...offer more than 1 option.

 

[ThreeWheels]

I find it amusing that people want the RT to be redesigned so that it's not.................an RT.
A little more power.............................yes. (They've already gone from a v-twin to a triple)
Some electronics that work well...................yes. (maybe the 2018 got it right, I don't know)
Shaft Drive................ABSOLUTELY
More storage................sure, the side bags could certainly be bigger.
Different colors, and color schemes ?
What else do you want ?
Fins ??

I'd like to see two things.
First, I'd like to be able to order a Spyder from the factory with options. If you want the tri-axis bars, you have to buy the stock bars AND the tri-axis bars AND have to pay for the dealer to do the removal and replacement. Same with all the chrome gee-gaws. doo-dads and what not. Wouldn't it be nice to order the Spyder and have it delivered with your chosen options already installed ?

Second, and I know I sound like a broken record, BRP needs to concentrate on improving their dealer service. Rather than add new models, make sure all their technicians know how to fix the models that they have.

Just my thoughts. If I'm wrong, I'm sure someone here will let me know.

 

[Rick H.]

Man oh man! You guys are hard to please. First off, the real money is in accessorizing a vehicle. Remove "farkles" like Harley has done and then charge the crap out the customer to put the same stuff on the bike that was once "standard". Oh, and when Harley did this little slight of hand with their big bikes the price on them didn't drop down one little cent. Problems come into the mix when people want to order different options right from the factory which mostly use an instant supply system. The more options you give to the customer the more difficult it is for the factory to keep up with customized orders and the greater the risk of something not being put together properly. I once ordered an AMC Jeep CJ-7 with an automatic transmission. It came with a 3 speed manual and was an end of the model year build. Now what? The V-8 option that I also wanted wasn't available the following year so I was confronted with take it, or leave it. My new wife at the time learned how to drive a manual trans pretty fast.

In reality I don't mind if the dealer adds on the extras I want, as long as the job is done properly, but the rub comes in when you get nothing back for the take off parts that many dealers try to keep for themselves to use later. Just look at the stock take-off muffler supplies most Harley dealers have on hand. Another example is the Tri-Axis handlebar. If I want one installed on my new Spyder I should get the cost of the take-off part back if I give the bars to the dealership. What the heck am I going to do with a set of new/old handlebars? Same with seats and windshields. Unfortunately it just doesn't work that way and the dealer usually is the big winner in the end. It seems to be that Harley and others have found a way to make even more money off their customers by giving them less.

Rick H.