stmike 1800
Member
It is not only the volume ,but the reception sucks big time .Never had a radio this bad on any bike i have owned.
They put a ton of Loctight on antenna threads. Unscrew a bit to break it, that improves reception. I messed around w mine for a bit and that was enough to get better reception. Some take it out completely, clean and put back. I’ve heard that works good. I only have 2 rock stations by me, unscrewing and putting back on allowed me to get both stations, even when in garage. Before doing that I’d only get 1 station if I was in certain areas. Much better now. I wanna figure out how to get Sirius on my ‘18. Not the best FM choices by me. Good luck.It is not only the volume ,but the reception sucks big time .Never had a radio this bad on any bike i have owned.
I did all that and still said DONE!!! and it really comes down to hardware so...
JL Audio here I come!!! Please fix my 2018 RT Limited!!!
I installed 5.25 component speakers up front (perfect setup) and 5.25 coaxials in the rear.
I used a JL MX500 watt to drive everything.
This system is the best I’ve ever heard in a spyder.
500watts of JL power is amazing and plenty to keep up with the harshest winds.
I did have to cut away some of the rear mount areas with a Dremel.
The system looks completely stock. Factory grills are all in place the only only “tell” is the JL badge i put over the BRP logo
just below the safety card.
Don’t let anyone tell you “you can’t do that” because i’m living proof you can.
Also I shut off the “auto” volume leveling feature it made a big difference on my JL system.
BRP should be ashamed of the audio system they put in a 30K bike.
If your like me all the software upgrades in the world will never satisfy our audio file ears.
Good luck...
They put a ton of Loctight on antenna threads. Unscrew a bit to break it, that improves reception. I messed around w mine for a bit and that was enough to get better reception. Some take it out completely, clean and put back. I’ve heard that works good. I only have 2 rock stations by me, unscrewing and putting back on allowed me to get both stations, even when in garage. Before doing that I’d only get 1 station if I was in certain areas. Much better now. I wanna figure out how to get Sirius on my ‘18. Not the best FM choices by me. Good luck.
I did all that and still said DONE!!! and it really comes down to hardware so...
JL Audio here I come!!! Please fix my 2018 RT Limited!!!
I installed 5.25 component speakers up front (perfect setup) and 5.25 coaxials in the rear.
I used a JL MX500 watt to drive everything.
This system is the best I’ve ever heard in a spyder.
500watts of JL power is amazing and plenty to keep up with the harshest winds.
I did have to cut away some of the rear mount areas with a Dremel.
The system looks completely stock. Factory grills are all in place the only only “tell” is the JL badge i put over the BRP logo
just below the safety card.
Don’t let anyone tell you “you can’t do that” because i’m living proof you can.
Also I shut off the “auto” volume leveling feature it made a big difference on my JL system.
BRP should be ashamed of the audio system they put in a 30K bike.
If your like me all the software upgrades in the world will never satisfy our audio file ears.
Good luck...
...found the audio volume control low, medium and high settings. ...it seems to get louder as we pickup speed which is weird but we like it.
Most touring bikes and most current cars have the same feature. It raises the volume of the radio the faster you go to compensate for louder wind noise, engine noise, etc. Low will only raise the volume a little, high will raise it a lot.
I did all that and still said DONE!!! and it really comes down to hardware so...
JL Audio here I come!!! Please fix my 2018 RT Limited!!!
I installed 5.25 component speakers up front (perfect setup) and 5.25 coaxials in the rear.
I used a JL MX500 watt to drive everything.
This system is the best I’ve ever heard in a spyder.
500watts of JL power is amazing and plenty to keep up with the harshest winds.
I did have to cut away some of the rear mount areas with a Dremel.
The system looks completely stock. Factory grills are all in place the only only “tell” is the JL badge i put over the BRP logo
just below the safety card.
Don’t let anyone tell you “you can’t do that” because i’m living proof you can.
Also I shut off the “auto” volume leveling feature it made a big difference on my JL system.
BRP should be ashamed of the audio system they put in a 30K bike.
If your like me all the software upgrades in the world will never satisfy our audio file ears.
Good luck...
Can you post the model number of the new speakers? Thanks
Do you have any instructions on how to upgrade the amp/speakers? Thanks in advance!
Do you have model # of speakers to use /amp. i have 2021 RT Limited, the radio sucks