-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Spyder not starting...Help
- Thread starter Appylover
- Start date
Silvervette05
New member
Check to make sure kill switch is not in stop position, make sure it is in natural, put foot on brake and try to
Start :thumbup:
Start :thumbup:
Kill switch is not in stop position,it is in Neutral,put foot on brake, and it still will not start.
Last edited:
revjvegas
New member
Chupaca
New member
Little checking..!!
when was the last time you started it..??
It's in neutral..check
Your foot is on the brake..check
Your kill switch is run position.. Check
You pressed the mode button to clear the screen..:dontknow:
You pressed the starter button..ckeck..does it click..?? Does it turn over..??
Try to jump start it..if it starts then your battery needs help. :dontknow:
when was the last time you started it..??
It's in neutral..check
Your foot is on the brake..check
Your kill switch is run position.. Check
You pressed the mode button to clear the screen..:dontknow:
You pressed the starter button..ckeck..does it click..?? Does it turn over..??
Try to jump start it..if it starts then your battery needs help. :dontknow:
Tried that but nothing came up. Oil icon still lights up.
Will try to jump start it tomorrow. I have to figure out how to do that first. Don't have anybody around who can help me. But I do have jumper cables.
When I press the start button the only thing that happens is the gauge cluster lights up then it goes off and the only thing lit up is the oil can icon but does not start.
Last time I started it was two and a half weeks ago.
NZSpyderRyder
New member
Oil can light
The oil can light illuminates when you turn the ignition on.
Sounds very much like you have a flat battery. you have a couple of options:
Jump start
Charge battery
Check battery connections
Hope you get it sorted.
The oil can light illuminates when you turn the ignition on.
Sounds very much like you have a flat battery. you have a couple of options:
Jump start
Charge battery
Check battery connections
Hope you get it sorted.
Not Cranking.
Thank You..
billybovine
Active member
Yes that is what the jumpstart points are designed for. If you have a 2012 or older the jumpstart posts are under the seat. If you have a 2013 or 2014 you have to open the front trunk and then remove the left access panel.
The instructions are in your owners manual.
Last edited:
Yes I have the 2012. I got it jump started and it started right up. Let it run for awhile before I turned it off.
Similar threads
