I had my bike at a shop in Arizona last week for a laser alignment. Found my bike was not out of align, and all looked good. Still had to pay the alignment because tech did take a look! Not what I’m venting about, looked at the “Shop Rate” sign, $180.00 per hour! Wow! Can not believe that! Comments welcome…:yikes:
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Shop Rates! Wow!
- Thread starter Don60
- Start date
BLUEKNIGHT911
Sadly Passed Oct 2024 - RIP
I recently had my alignment checked by Netzley Tire ..... took all of 10 min. to tell me it didn't need adjustment _ and NO CHARGE ..... I hate Stealers ..... Mike :thumbup:
Little Blue
SpyderLovers Ambassador
Shop Rates
YES, the 'Shop Rates' are terrible. This Covid-19 is going to bring America to it's knees. ...:banghead:
YES, the 'Shop Rates' are terrible. This Covid-19 is going to bring America to it's knees. ...:banghead:
Isopedella
Well-known member
As a new Spyder owner and site member I was very surprised with this site in regards when Blokes with a bike problem asking for help with what appeared to be the semi stock answer was the " Take it to the shop".
I like wrenching shop work as you Blokes call it.
I have some tools, a shed, and the time and enthusiasm to do most bike stuff.
The electronic stuff I admit is beyond me.
If a Blokes is willing to give it a crack, whats wrong with that?
Other sites like Triumph, Honda Goldwing and ADV bikes, usually reply with here ya go mate.
Not have you done a search.
How about I did a search for ya..?
Not take it to the shop.
This is how ya do it and here is the result.
Shop charge out rates like $180..... Crikey
There must be members who have the knowledge for quite a few of the things appearing here with Blokes asking for tips, and pointing in the right direction before the Take it to the shop kicks in.
How about stepping up?
I like wrenching shop work as you Blokes call it.
I have some tools, a shed, and the time and enthusiasm to do most bike stuff.
The electronic stuff I admit is beyond me.
If a Blokes is willing to give it a crack, whats wrong with that?
Other sites like Triumph, Honda Goldwing and ADV bikes, usually reply with here ya go mate.
Not have you done a search.
How about I did a search for ya..?
Not take it to the shop.
This is how ya do it and here is the result.
Shop charge out rates like $180..... Crikey
There must be members who have the knowledge for quite a few of the things appearing here with Blokes asking for tips, and pointing in the right direction before the Take it to the shop kicks in.
How about stepping up?
trikermutha
New member
Well this Bloke says bring it to the shop if you pay for a warranty why wrench on it and void the warranty? I have no problem wrenching but sometimes you just have to let the shop do it or cause more grief.
$180 is definitely above average--but last time I went in was over a year ago. With the wage inflation and labor shortage, I can't say I'm shocked to see shop rates rising rapidly. If you can find an independent shop that works on Can-Am, they're usually cheaper than dealer rates.
blacklightning
Well-known member
I think my local shop is still at $116 per hour. Kinda making me rethink my design fees. Seems like I am not keeping up with inflation.
arkyleo
Member
Didn't know hourly rate was that high (in some places). I'm fortunate to live close to LaMonsters where I went for a balance, align and oil change last year and was pleased with their service and prices. The align was 1/3 of the quoted cost from the dealer --it DID need it--and my friends, also on a 2021 RTL did not need one and was not charged.
When it warms up a bit I plan on re-visiting their showroom for some items I will be needing soon . (lusting after that ZumoXT).
When it warms up a bit I plan on re-visiting their showroom for some items I will be needing soon . (lusting after that ZumoXT).
ARtraveler
R.I.P. Dwayne
When I left Alaska in May 2019, the shop rate was $130 per hour.
When I arrived in Arkansas, and have been to Spyderpops and Lamonster Garage for servicing, I found the shop rates to be under $100 per hour. Don't know what they are currently, but both F3's are going to be annually serviced in about a month. Note: neither of the above is an "authorized" service center for Can Am, but I would rather have their mechanics work on my Spyders, than "genuine" mechanics. And I use the term very loosely. :bowdown:
Spyders have always been expensive to service, but they got me where they want me. I cannot get down on the hands and knees and do any service on my machines.
When I arrived in Arkansas, and have been to Spyderpops and Lamonster Garage for servicing, I found the shop rates to be under $100 per hour. Don't know what they are currently, but both F3's are going to be annually serviced in about a month. Note: neither of the above is an "authorized" service center for Can Am, but I would rather have their mechanics work on my Spyders, than "genuine" mechanics. And I use the term very loosely. :bowdown:
Spyders have always been expensive to service, but they got me where they want me. I cannot get down on the hands and knees and do any service on my machines.
GFrog
Member
Found this DIY alignment Video in this site.
https://www.spyderlovers.com/forums/showthread.php?110524-Laser-Alignment
Will have to give it a try. Probably cost much less in equipment that what dealers are asking.
https://www.spyderlovers.com/forums/showthread.php?110524-Laser-Alignment
Will have to give it a try. Probably cost much less in equipment that what dealers are asking.
trikermutha
New member
You have to know this was going to happen. All minumum wages have gone up along with the price of goods , insurance etc.
Wish I made that kind of money back when I was in my early years of working . I may have been retired by now..:shocked:
Wish I made that kind of money back when I was in my early years of working . I may have been retired by now..:shocked:
IdahoMtnSpyder
Active member
Equipment is only a part of the alignment process. You must know and understand the details of all the angles involved, and the relationship of toe-in, track width, and target width. I did my own laser alignment a year ago. The process was a bit tedious, and there are a lot of parameters to account for. I documented it here: https://www.spyderlovers.com/forums...DIY-laser-alignment-correcting-dealer-foul-up. My posts resulted in a lot of discussion about what all is involved with a lot of positive back and forth comments. I suggest you read it all the way through before you start.
My RT was handling quite nicely still at the end of the summer!
Just got off the phone "discussing" the $660 (4hrs.) alignment and the $487 oil change with the service manager. His comments were that's the corporate rate for these services and he is stuck with the charge rate. (Really, I'm stuck with it.) He's offered me a $200 gift certificate when I'm there next time, but I don't see me returning. I can drive to the west side of the state (Washington), have the Spyder serviced, spend the night, have a great meal, and return home the next day and still save money.
With these costs so blatantly high for some of us, I wonder if these rates/charges are due to exactly as the service manager said. My local dealer is a Ride Now dealership and is a huge chain around the US. I'd be interested in how many of you with these high priced services were at a chain dealership.
Regardless, I'll start doing my own service and/or find somewhere else to go.
With these costs so blatantly high for some of us, I wonder if these rates/charges are due to exactly as the service manager said. My local dealer is a Ride Now dealership and is a huge chain around the US. I'd be interested in how many of you with these high priced services were at a chain dealership.
Regardless, I'll start doing my own service and/or find somewhere else to go.
Last edited:
GFrog
Member
Thank you very much for the link. That was a really interesting project that you did and the whole thread was very educational.
I looked-up the Johnson Level & Tool 40-6164 on Amazon.ca and it's on special for only $81.37 instead of $95. I suppose that getting two of those is still cheaper than than getting it aligned at the dealer.
I'm still waiting for my machine to arrive, so I'm getting as much information as possible as I can from this forum and various videos. Sorting the wheat from the chaff can be a bit of a challenge, but well documented threads like your project goes a long way in helping newbies like me.
Thanks
Update: I just remembered this video that I saw a month ago. He probably should have adjusted both tie rods equally. What do you think of his method?
https://youtu.be/Ho12zpOkAPA
Last edited:
IdahoMtnSpyder
Active member
Pass on it. His method has a couple of shortcomings. First, measuring on the wheel rim front and back is such a short distance it can lead to significant error in the end. That's why the laser approach uses targets at 6 feet or so fore and aft of the front wheel center. Also, his method does not align the wheels so that the travel path, or track, of each wheel is equal distance from the rear wheel. BUDs is really needed to set or reset the steering angle sensor and steering torque sensors readings to zero for straight forward travel.
You don't want to focus on adjusting the tie rods equally. Each side needs to be adjusted so that the toe-in ends up at what you're aiming for, the tracks are equidistant from the rear tire, and the handlebar is as close to perpendicular to the line of travel as possible.
For an understanding of what the significance of the steering torque sensor and the steering angle sensor are get a copy of the service manual for your Spyder. About the best place to get one is www.canammanuals.com.
Similar threads
