-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Screen went blank
- Thread starter Eagle1
- Start date
ARtraveler
R.I.P. Dwayne
Did you get any water in the electronics?
Chupaca
New member
Bummer...
Who did tires and did they mess with the electonics there. ABS and sensors ?? Wash and wax...was it under high pressure..? may just need to dry out...P0504 seems to be brake related and the P062C is also a communication to the ECM (engine control module) needing to also check the VCM ( vehicle control module) if it dosen't dry out or if you pull the key and wait for the computers to reset, maybe 30/45 minutes you may have to have it hooked up to buds at the dealer..:banghead:
Who did tires and did they mess with the electonics there. ABS and sensors ?? Wash and wax...was it under high pressure..? may just need to dry out...P0504 seems to be brake related and the P062C is also a communication to the ECM (engine control module) needing to also check the VCM ( vehicle control module) if it dosen't dry out or if you pull the key and wait for the computers to reset, maybe 30/45 minutes you may have to have it hooked up to buds at the dealer..:banghead:
billybovine
Active member
If you mean "hit switch" is press the starter button. Then the screen went blank. That's a dead battery. Charge it up and if it won't take charge, get a new one.
jtoro1
Member
I agree water in a connection most likely ,let it dry out should be ok , it happen to me
SpyderAnn01
Active member
He used a spray detailer not water.
IdahoMtnSpyder
Active member
Screen blanking out when you hit the starter is indicative of an undercharged battery. The ECM pukes on low voltage even if everything else lights up.
BLUEKNIGHT911
Sadly Passed Oct 2024 - RIP
ALSO THIS
....Even if you find the Battery is OK after you charge it......put STAR washers on the terminals before you bolt it down .....( and not the ones Value Accessories calls Star Washers )......Mike :thumbup:
billybovine
Active member
Thanks for the update.
Similar threads
