San Diego Help

[robhowen]

I am driving my pickup from Tucson to San Diego for the installation of an AmeriDeck loader in the back of my pickup so I may transport my RT using only my pickup. My installation is Monday May 20th, beginning at 8am, at San Diego Hydraulics at 1400 Cleveland Ave, National City, CA 91950. I am not taking my Spyder; thus my post here on Spyderlovers. It would be so helpful if someone in San Diego that has an RT could join me Monday morning for test fitment of the AmeriDeck. I mean things like marking where the chocks need to be installed and general validation that it fits and works. I don't think it will take a lot of your time.

If anyone can help me please call me ASAP on my cell at (602) 625 5499 or email me at [email protected] or PM me here on Spyderlovers. I can give you more details and we can arrange meeting.

Thank you and I hope this works for someone.

You can see what I'm talking about at https://www.youtube.com/watch?v=syz6MefiBAw

Regards,
Rob Owen

 

[SpyderAnn01]

You might want to get on Facebook and ask this on the Spyder Ryder of America -San Diego Chapter page. Good luck.

 

[BLUEKNIGHT911]

I am driving my pickup from Tucson to San Diego for the installation of an AmeriDeck loader in the back of my pickup so I may transport my RT using only my pickup. My installation is Monday May 20th, beginning at 8am, at San Diego Hydraulics at 1400 Cleveland Ave, National City, CA 91950. I am not taking my Spyder; thus my post here on Spyderlovers. It would be so helpful if someone in San Diego that has an RT could join me Monday morning for test fitment of the AmeriDeck. I mean things like marking where the chocks need to be installed and general validation that it fits and works. I don't think it will take a lot of your time.

If anyone can help me please call me ASAP on my cell at (602) 625 5499 or email me at [email protected] or PM me here on Spyderlovers. I can give you more details and we can arrange meeting.

Thank you and I hope this works for someone.

You can see what I'm talking about at https://www.youtube.com/watch?v=syz6MefiBAw

Regards,
Rob Owen

shoot a PM to Gene aka " Chupaca " i'm pretty sure He lives in San Diego …… Mike hyea:

 

[robhowen]

b.u.m.p.
Rob

 

[Chupaca]

Little checking.....

Have you checked with the local dealers who may have a demo you could use. Also you can check with the SRA (Spyder Ryders of America) San Diego. I do not have an RT but many there do. Also if you check with George Parry from SRA he knows them all...

Vey's motorsport in El Cajon and Lemon Grove
Fun Bike Center in San Diego

Good luck :thumbup:

 

[robhowen]

Thank you for your suggestions! Unfortunately one has to be a member to post on the SRA San Diego Facebook group.
Rob

 

[Pirate looks at --]

Thank you for your suggestions! Unfortunately one has to be a member to post on the SRA San Diego Facebook group.
Rob

I am pretty sure if you ask they will allow you to join!

 

[BLUEKNIGHT911]

Thank you for your suggestions! Unfortunately one has to be a member to post on the SRA San Diego Facebook group.
Rob

I watched the video …. The model RT they showed looks Exactly ( the size / dimensions ) like yours. Why do you think yours won't fit ????? …..just a thought ….. Mike hyea:

 

[robhowen]

I understand, Mike. The one in the video MAY (not sure, and neither is the distributor) be a slightly longer model that they used to make (no longer make) for Spyders. If it's the standard model, what I'm getting, then I have no issue.
Rob

 

[sandeejs]

Make sure you bring your owners manual. They have all the specs regarding size listed. Good Luck!
~Sandee~

 

[robhowen]

Sandee, I've already sent factory specs to the installer and I just completed personally measuring this morning allowing a 2" gap at the front.
Thank you,
Rob

 

[Chupaca]

Thank you for your suggestions! Unfortunately one has to be a member to post on the SRA San Diego Facebook group.
Rob

George Parry would be the one to get in touch with you can text him at 1-619-339-1446 Tell him Gene gave you his number and he may have some folks more to the area you will be coming to....

 

[robhowen]

Thank you very much, Gene.
Rob

 

[robhowen]

Update: Paul from San Diego has contacted me and has graciously offered to meet me at San Diego Hydraulics! He saw my post on the Spyderlovers facebook page. Thank you everyone for your help and suggestions.

Rob

 

[LeftCoast]

Pics with your Spyder loaded up would be great!

 

[robhowen]

Thanks for asking and I will after I get it home and install whatever chocks and tie-down methods I intend to use. I'll also create a brief video. I'm minimally going to use it for my Deadwood trip in July.
Rob

Pics with your Spyder loaded up would be great!

 

[UtahPete]

Update: Paul from San Diego has contacted me and has graciously offered to meet me at San Diego Hydraulics! He saw my post on the Spyderlovers facebook page. Thank you everyone for your help and suggestions.

Rob

I'm glad it worked out for you, Rob.

 

[robhowen]

Update: David Levitt at Sierra Cycles called me and offered me the use of an RT that he had just purchased in San Diego. How many dealers do you know that would that? The AmeriDeck was installed Monday by San Diego Hydraulics, who I can't say enough about. Truly great folks that did an outstanding job. More to come as I install mounts for my RT. I'll post a new thread of what it is like with photos, videos, and my experience.

Thanks again Paul!

Rob