Why are they / You using a Honda gasket on a Can-Am??could leaky y-gasket cause all this?
when dynojet pull the pipes apart, they could not get the pipe all the way up due to thickness of the honda gasket. i had very hard time with that also.
could leaky y-gasket cause all this?
when dynojet pull the pipes apart, they could not get the pipe all the way up due to thickness of the honda gasket. i had very hard time with that also.
Yes they COULD cause this. The two smaller gaskets (where you are using the Hondas) are upstream of the O2 sensor.
When I changed my gaskets (also Hondas), I found the best way was to remove the muffler and L-pipe. The remaining pipes were light enough to easily wiggle/maneuver over the new gaskets.
I also had to use a large socket and mallet to widen the female part of the pipes joints.
.
I put the honda y gaskets on mine last weekend. The can am ones lasted on mine about 9,000 miles. Others have gotten even less mileage, even as little as 1,500 miles. The goldwing gaskets are the same size and seem to last longer.
http://www.spyderlovers.com/forums/showthread.php?t=19691
OH OK NOW I SEE.Think I will stick with Napa parts.Takes a little work to find the right one.But' when you do 1/2 price of Honda and just as good if not better. I have done dealt with Honda gaskets on my VTX1800. Not so great in my books
OH OK NOW I SEE.Think I will stick with Napa parts.Takes a little work to find the right one.But' when you do 1/2 price of Honda and just as good if not better. I have done dealt with Honda gaskets on my VTX1800. Not so great in my books
Alright, let's get back to the problem in hand
Could a leak in the exhaust could cause all the issues I am having?
LOL Boy aint dat da truth
There the Gold wing gaskets not VTX. Apples and Oranges.![]()
I changed mine to the honda gasket at 6000 miles but I will tell you that teh BRP gasket was still in pretty good shape. That being said the Honda one was clearly a better made product.
Yes it could. I would also look at your spark plug wires & plug condition. We have had a few were the spark plug boots would leak and arch to the head. This would cause a weak spark in the engine. The easiest way to check it is remove your panels and start the bike in a dark area, see if you notice any arching to the head.
I really haven't had a reason to look yet. Mine have been doing good so far. As far as the Napa part # I won't have that until I need to change mine. If you have got your Honda's installed and they are working good.Then I would just go with that. As far as the Honda's go when I had my VTX1800 a LOT of folks was having problems with the stock gaskets and a few just jumped over to Napa. My self being an Auto Tech. Will first take my old ones to Napa and try to match them Most of the time its not to hard if you have the old gaskets. But' as others have said" If the Honda is working and working good, Then stay with that as long as all you have to do is run up to the dealer and pick them up as a stock Item? " If Not then most of the time Napa can have them on the noon run or the next morning. Its really no big deal as long as you get a good gasket that works. Sounds like the Honda is the one that works. Think thats the one I would stick with :2thumbs:Eddie... what is the napa part number for their exhaust gaskets? And... were you able to locate a substitute for the large lower gasket. If so please post the part numbers for all of us. I've been searching for 10 months trying to find a sub for that big gasket.
I've been using the Honda GL1800 exhaust gaskets for a year now. They are nice and tight. I've had them off a couple of times and the only time you will have any trouble installing them is if there is a tiny wire sticking out. Inspect them closely and if you see a meat hook just snip it off and install.
Thanks for the info. Ken krb1945
Eddie... what is the napa part number for their exhaust gaskets? And... were you able to locate a substitute for the large lower gasket. If so please post the part numbers for all of us. I've been searching for 10 months trying to find a sub for that big gasket.
<snip>
Thanks for the info. Ken krb1945
Because many have found the Honda parts to be superior to BRP's :thumbup: