-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
RT Trailer wiring harness
- Thread starter splake0
- Start date
allcd88
New member
Here is the one I ordered:
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/183520738273
....and a video I did for the installation:
https://youtu.be/-5BK_hfWRmA
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/183520738273
....and a video I did for the installation:
https://youtu.be/-5BK_hfWRmA
So nobody knows?
billybovine
Active member
The OE harness is the same for 2010 to 2017. Is different for 2018, 2019 and will not fit. The trailer harness is in 3 parts. The section that plugs into the Spyders harness is available as a separate part. So you can make any year fit.
I did not notice that but I think there should be another module? I want a OEM (BRP) harness with modules.
Garf
Member
I just had a similar situation and here is what I discovered.
To get the OEM wiring you need 3 pieces because BRP doesn't sell it as a complete unit.
#1 is what I call a Y connector (BRP calls it a module harness) part # 710005823
this connects to the Spyder wiring harness and provides a take off for the trailer
#2 is the actual taillight converter ( BRP calls this a module) part # 710003903
this converts the 6 wire Spyder circuit to a 4 wire trailer circuit while also isolating the trailer from the Spyder
#3 is the trailer harness itself ( BRP also calls this a trailer harness) part #710003272
this attaches to the output of the Module and ends in a 4 pin SQUARE receptacle that you can plug your trailer into.
If you have anything other than a 4 pin square trailer plug you will need to either use an adapter or rewire your trailer.
Your Spyder is a 2015, mine is a 2017 so all part numbers are the same. Hope this helps. Good luck
To get the OEM wiring you need 3 pieces because BRP doesn't sell it as a complete unit.
#1 is what I call a Y connector (BRP calls it a module harness) part # 710005823
this connects to the Spyder wiring harness and provides a take off for the trailer
#2 is the actual taillight converter ( BRP calls this a module) part # 710003903
this converts the 6 wire Spyder circuit to a 4 wire trailer circuit while also isolating the trailer from the Spyder
#3 is the trailer harness itself ( BRP also calls this a trailer harness) part #710003272
this attaches to the output of the Module and ends in a 4 pin SQUARE receptacle that you can plug your trailer into.
If you have anything other than a 4 pin square trailer plug you will need to either use an adapter or rewire your trailer.
Your Spyder is a 2015, mine is a 2017 so all part numbers are the same. Hope this helps. Good luck
Similar threads
