RT Limited Cup Holder

[jlemkow]

Anyone find a reasonable cup holder for the RT Limited?

 

[bmwlarry]

BRICa makes a cupholder for a stroller. Its about $12 and cllamps to the rear hand grips or I have mine clamped to the rear edge of the dash top.

 

[RodMyers]

Make one yourself

 

[Bike-O-Din]

This is what I use


I always wear a full face helmet, and I never drink while I am riding.

When I stop to get gas/eat/visit restroom, etc I use this. Has worked so far.

 

[Pennyrick]

Anyone find a reasonable cup holder for the RT Limited?

This is an ISC cupholder mounted with a 1" RAM ball to one of the 11mm bolts in the center of the Spyder. Turn out the stock bolt and replace with on that is 3/4" longer and a spacer. You can swivel it back on the driver side of the bars or forward away from the driver.

Either way works great!

 

[mrfats]

I like Diamond R Accessories. They're a sponsor. I have a cup holder for me on one on the passenger armrest also from Diamond R...

Take a look. Allen and Patti are great to work with.

 

[btcherm]

made my own.:doorag:

 

[Kungfuspyder]

Custom made cup holder for can-am spyder rt

Anyone find a reasonable cup holder for the RT Limited?

Type in the title of my message and it will lead to the link where I got my cup holder, the vendor is Air wing guy, he makes custom products for a variety of bikes, mine cost $55.75, it looks great.

 

[Kungfuspyder]

Images of cup holder

Anyone find a reasonable cup holder for the RT Limited?

It has 2 foam liners for sizing. Type in "custom made cup holder for can-am spyder rt" and it will connect you to the posting.

 

[currin20fan]

Cup Holder

I tried the Brica cupholder. I didnt' like it on the bike so put it on the boat. I now use the cupholder from Diamond R. It works really well and I'm happy with that one. They are a sponsor on this site also and great people to work with.

 

[BikerMike]

I had an old cupholder from Barefoot Willie. I found a plastic pipe clamp at Menards for a couple of bucks and attached the cup holder to the clamp. It works well for me.

 

[Bob Denman]

Does anybody actually try to pull their drink out of one of these holdes and take a swig with at speed? :shocked:
(I keep the drinks in the top trunk; that's what fuel stops are used for! :thumbup

 

[Harley]

We bought a small cooler at Walmart that fits into one of the side bags, and always have a cold drink ready when we stop for fuel..

Harley & Darlene

 

[CSW61]

Butler Cups are made for Spyders RT my wife has the small one and loves it.:yes:

 

[Clicker1944]

BRICa makes a cupholder for a stroller. Its about $12 and cllamps to the rear hand grips or I have mine clamped to the rear edge of the dash top.

That's what I use and one for the passenger grip too! :thumbup:

 

[Pennyrick]

Does anybody actually try to pull their drink out of one of these holdes and take a swig with at speed? :shocked:
(I keep the drinks in the top trunk; that's what fuel stops are used for! :thumbup

When it's 110 in the shade and I'm trapped in bumper to bumper traffic in Atlanta, I welcome the cup holder and its contents.

 

[Dragonrider]

I never use a full hat - and have a cup holder attached to a RAM mount, attached to the back of my GPS mount. I always have coffee in the morning, and ice water the rest of the day (hot water, if it's cold). I use a plastic straw from an old Butler cup, which I insert into my Starbucks travel mug.

I have a friend with the same system, except he never puts hot liquids in his cup, so he has a plastic cup with a lid and straw.

Both work well at freeway speeds. Drinking while on the twisties does not work well…..

 

[fireplug98]

I got the cup holder made by spyderrt. Attaches to handlebar. Works great !!!!

Tommy J.

I'll try and find a pic of it !!

 

[fireplug98]

Heres a pic I found !!

 

[fireplug98]

Here it is on my Spyder !!!
Perfect for water bottle