SpyderPapa
New member
Does anyone kown how to remove the key cylinder from the cam am 622 trailer.
Thanks
Thanks
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
RT key cylinder for trailer
- Thread starter SpyderPapa
- Start date
Jeriatric
Thinks out loud
How to ?
Midwest manual - the link below is for 2010 - don't know of any newer, but, it covers both spyder and trailer. Twenty well spent bucks if you so choose. Just remember it will have old info....like belt tension, for example.
I checked mine and it is a twelve step process. Would have copied and pasted them for you, but, it's a protected pdf.
Jer
http://www.midwestmanuals.com/Motorcycles/can-am.htm
Midwest manual - the link below is for 2010 - don't know of any newer, but, it covers both spyder and trailer. Twenty well spent bucks if you so choose. Just remember it will have old info....like belt tension, for example.
I checked mine and it is a twelve step process. Would have copied and pasted them for you, but, it's a protected pdf.
Jer
http://www.midwestmanuals.com/Motorcycles/can-am.htm
Wiredux
New member
One reason I remove the protections from my PDF.
Key Barrel Removal from RT Trailer
1. Remove inner panels.
2. Remove the component support cover plate.
3. Disconnect both latch cables.
4. Remove 4 retaining screws from the latch mechanism assembly.
5. Pull main control handle assembly out if it location towards inside of trailer.
6. Use a small screwdriver to pry out the handle pivot from pivot points.
7. Remove pivot from mechanism.
8. Remove 2 top retaining screws from the latch plate to remove the center blank cover.
9. Remove the center black cover
10. Hold latch plate in place while removing the 2 lower retaining screws as the place is spring loaded.
11. Remove the spring and ball.
12. Remove the key barrel actuator cover.
13. Insert key in key barrel.
14. Turn key 1/2 turn until the retaining tab is aligned with the notch.
15. Insert a small screwdriver in the notch and gently lift the key barrel retaining tab to allow remove of the barrel.
16. While holding retaining tab, push key barrel out of its location.
Key Barrel Removal from RT Trailer
1. Remove inner panels.
2. Remove the component support cover plate.
3. Disconnect both latch cables.
4. Remove 4 retaining screws from the latch mechanism assembly.
5. Pull main control handle assembly out if it location towards inside of trailer.
6. Use a small screwdriver to pry out the handle pivot from pivot points.
7. Remove pivot from mechanism.
8. Remove 2 top retaining screws from the latch plate to remove the center blank cover.
9. Remove the center black cover
10. Hold latch plate in place while removing the 2 lower retaining screws as the place is spring loaded.
11. Remove the spring and ball.
12. Remove the key barrel actuator cover.
13. Insert key in key barrel.
14. Turn key 1/2 turn until the retaining tab is aligned with the notch.
15. Insert a small screwdriver in the notch and gently lift the key barrel retaining tab to allow remove of the barrel.
16. While holding retaining tab, push key barrel out of its location.
Wiredux
New member
I am a network security guy. I just remove the encryption from the PDF. If you would like I can do the same for you. As long as you know how to FTP.
Jeriatric
Thinks out loud
Thanks....but it's not worth bothering you. I have a printed version as well as the pdf, suppose I could do a quick scan next time. If needed.
jer
SpyderPapa
New member
Thanks
Thank you all for your reponses, my question has been answered.:bowdown:
Thank you all for your reponses, my question has been answered.:bowdown:
Similar threads
