RT-622

[Jetfixer]

Finished putting the stripes on my RT-622 today and realized the rear lid sits slightly higher on the left side than the right side. Is there an adjustment at the hinge for this? I'm hoping someone here can point me in the right direction before I have to do my contortionist act to find it! A forum search here and the owners manual are coming up blank.

 

[Bfromla]

Finished putting the stripes on my RT-622 today and realized the rear lid sits slightly higher on the left side than the right side. Is there an adjustment at the hinge for this? I'm hoping someone here can point me in the right direction before I have to do my contortionist act to find it! A forum search here and the owners manual are coming up blank.

View attachment 141932View attachment 141933

looks good in pic:thumbup: Is there a gap increase on that side? If no adjustment maybe that side of trailer was in sun too long, & caused small warp. A good body shop would have informed you prior to adding the stripes. Hoping it is just optical illusion & all is fineray::doorag:

 

[Cruzr Joe]

Looks good to me.

Cruzr Joe

 

[Questions]

That's the custom color version of the GT Racing Stripe package from Wrapmyspyder, isn't it? I have a black RT and am thinking of getting the same thing. Looks very nice!

 

[PapaHotel]

You might be able to add a small rubber bumper to equalize the gap, but it may be a touch harder to latch and/or unlatch.

 

[trikermutha]

maybe loosen the hinge bolts and try to realign?? or is something causing to sit higher than the other side??

 

[M109Dreamer]

Our's had a similar issue. What I did was loosen up all bolts on the hinges. I climbed inside had the wife shut the lids and then i made the adjustments from inside and tighten them down as she adjust and aligned the gaps from the outside.

Sent from my SAMSUNG-SM-G920A using Tapatalk

 

[Cruzr Joe]

Our's had a similar issue. What I did was loosen up all bolts on the hinges. I climbed inside had the wife shut the lids and then i made the adjustments from inside and tighten them down as she adjust and aligned the gaps from the outside.

Sent from my SAMSUNG-SM-G920A using Tapatalk

I have heard about people coming out of the closet, but never coming out of the trailer, might be a redneck thing.:roflblack::roflblack::roflblack::roflblack::roflblack::roflblack:

SORRY, the Devil made me say it.

Anonymous

 

[M109Dreamer]

I have heard about people coming out of the closet, but never coming out of the trailer, might be a redneck thing.:roflblack::roflblack::roflblack::roflblack::roflblack::roflblack:

SORRY, the Devil made me say it.

Anonymous

Ive been told that I act like a redneck at times. [emoji41]

Sent from my SAMSUNG-SM-G920A using Tapatalk

 

[Jetfixer]

That's the custom color version of the GT Racing Stripe package from Wrapmyspyder, isn't it? I have a black RT and am thinking of getting the same thing. Looks very nice!

You're right, they came from Pete. I did the install myself on the bike and the trailer. Takes a lot of patience. In fact, Pete is using my photos on his ad for the GT stripes!

 

[Jetfixer]

Our's had a similar issue. What I did was loosen up all bolts on the hinges. I climbed inside had the wife shut the lids and then i made the adjustments from inside and tighten them down as she adjust and aligned the gaps from the outside.

Sent from my SAMSUNG-SM-G920A using Tapatalk

You are very trusting, my friend!! I figured that I would have to do something similar.

 

[Jetfixer]

Here's what I'm talking about...

 

[Brentc]

Here's what I'm talking about...

View attachment 141955

Are your shocks compressing completely?