• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Ride-on tire sealant-balancer

fishcraz

New member
Is anyone using the ride-on product in their tires on an RT? If so how much do you put in front tires vs rear tire? I order some today and hope to add tp my tires this weekend. Picked up our 2011 RT-Limited about 2 weeks ago. There seems to be considerable vibration from tires on this ride vs our 2010 RT-S Limited. So hoping this will help balance the tires...
the web site for the ride-on product indicates it will smooth out any balance issues you may have, along with providing a sealant agent in the
event of a punction..so hopefully no flats...hopefully.

Thanks for any help anyone can offer on doesage for the tires.

Duane
 
I have had it in my 2011 RTS for the last 400 miles and it work as stated I haven't taken the wheel weights off yet but I intend to.

Pete :yes::yes:
 
amount needed

i put some in my RT limited this weekend i used 13oz in front and 18 in the back this is what Rideon and Lamonster recommended on their add during spyderfest it worked well for me the bike runs smooth.
 
:agree: I have 1,000 miles since adding it and it does make a difference. Glad I took Lamonts advice (again).
 
Well...I added Ride-on to my 2011 RT-Limited tires today and rode
for about 35 miles. Can't say I'm happy at this point. The vibration is
even worse...especially in the front tires. The fenders are vibrating terrible, as well as the mirrors and me. I had hoped this would take care
of the vibration in the front that I have been experiencing since we got
the bike about 3 weeks ago. Our 2010 RTS had no vibration....very smooth ride. So we'll see...but right now thinking I may have to now
pay to have the tires unmounted, clean out the Ride-on and hope for
balancing.
 
It would have seem to me that you should have made the dealer address this problem seeing you have just biught the :spyder2: If it that bad you might have a bent rim
 
Well...I added Ride-on to my 2011 RT-Limited tires today and rode
for about 35 miles. Can't say I'm happy at this point. The vibration is
even worse...especially in the front tires. The fenders are vibrating terrible, as well as the mirrors and me. I had hoped this would take care
of the vibration in the front that I have been experiencing since we got
the bike about 3 weeks ago. Our 2010 RTS had no vibration....very smooth ride. So we'll see...but right now thinking I may have to now
pay to have the tires unmounted, clean out the Ride-on and hope for
balancing.

It is fairly common that the vibration is worse while the Ride On is distributing itself into the proper area of the tires.. Remember it goes in as a blob and it takes sometime to distribute so it would be more out of balance than to begin with.. make your evaluation after at least 100 miles and I feel confident you will be happy.. I sure am with mine!!!!!!
 
How much Ride-on does it take for the Spyder trailer tires?

Thanks.....Duane
The Ride-On chart advises 8 oz for each tire---that is 1 16 oz bottle.
Make sure you have removed your wheel weights. They are no longer needed with the Ride-On.
Have Fun and Ryde Safe C-YA RL
 
Removed the wheel weights last evening. Did not get out to ride again
and see if removing the weights helped with the vibrations. Hopefully
will try tonight. Will let folks know if the vibration went away.

Thanks for all the comments,
Duane
 
I had a horrible vibration when I first installed Ride-On in my RS. I removed the wheel weights and it only made a slight improvement. I blamed it on Ride-On and then I found out it was due to both front rims being bent!
 
I have to admitt, we've only had this Spyder about a month and the vibration has been there since day one. Unlike the 2010 we had which
was very smooth. I'm hoping it's not the wheels, but thinking it may be
now. Especially after removing the wheel weights last evening...there were many weights on the right front tire. Way more than it should take
to balance any decent tire. So thinking it may be due to bent wheel or
wheels....but will wait before I judge on that. But no matter what,
on a new bike, I shouldn't have to be concerned with these things....get time to mount up and ride so be the only issue.

Duane
 
When the local tire place discovered the bent rims, they said it was common due to the size of the rims and the Michigan potholes. In addition, the rims are made in China.
 
Well...I added Ride-on to my 2011 RT-Limited tires today and rode
for about 35 miles. Can't say I'm happy at this point. The vibration is
even worse...especially in the front tires. The fenders are vibrating terrible, as well as the mirrors and me. I had hoped this would take care
of the vibration in the front that I have been experiencing since we got
the bike about 3 weeks ago. Our 2010 RTS had no vibration....very smooth ride. So we'll see...but right now thinking I may have to now
pay to have the tires unmounted, clean out the Ride-on and hope for
balancing.
ive only had my bike a week now but when i got it it would vib and shake at speeds of 55+ so i chcked alot of things it could been then not sovling
the problem took to the dealer ,,,, it had to much tire preasure in the front it had 25 lbs they set it at 15 and now its smoth

i felt like a dumbass for not checking but that all it was
i hope this helps
 
Back
Top