Removed add-on lights - now Tail Lights don't work?! Ideas?

[sledge]

The Spyder I traded for last summer had some stick on lights on the top rear trunk lid. The wires were around the hinge of the lid and I took them off. I cut them with wire cutters and now the tail lights dont come on. BUT, I'm not really sure they were on before I cut those wires. Also, the wires were not connected to anything - the only place they got power from was the Cig. Lighter hole inside the top trunk. I have checked all the fuses, nothing is bad. Anyone have any idea on where the Cig. Lighter hole gets its power??

 

[cptjam]

Open both saddlebags. Remove rear panel. Trace down to where the lights tied in. I’ll bet you find the problem. Torx 30 screwdriver is under the seat in a toolroll. If you have to , remove the black lower fender screws, let it swing down. Remove and unplug tail lights. Inspect wires. There might be a flasher module, which frequently is the problem. I’m available Saturday. Call if you need help. Joe

 

[sledge]

thank you very much , I am an retired Diesel Mechanic , but there is a big difference in a Kenworth and a Spyder ... LOL I have been trying to find Where to look for it more than what to look for . I really thank you for your Service too . I will check this in a few days , and I'll let you know what I find. Thanks again .

 

[cptjam]

When you get to it, call if you need help. Joe