rear turn signal

[Mark Gannon]

Can I change out the rear turn signals with led bulbs and not hurt the wiring?
This is on a 2013 rt

 

[jcthorne]

wiring is not the problem. Nanny will not work with the LED replacement bulbs. Even with the load resistor installed.

 

[Mark Gannon]

wiring is not the problem. Nanny will not work with the LED replacement bulbs. Even with the load resistor installed.

I dont want to sound dummy like but what is the nanny? Sorry!

 

[garb55]

wiring is not the problem. Nanny will not work with the LED replacement bulbs. Even with the load resistor installed.

I put LED bulbs [front and back] on my 2008 GS
used one load resistor on each of the back ones and everything worked fine
Don

 

[Bob Denman]

I dont want to sound dummy like but what is the nanny? Sorry!

We "lovingly" refer to the computerized system that monitors what's going on with our bikes, as "Nanny"...

 

[jcthorne]

I put LED bulbs [front and back] on my 2008 GS
used one load resistor on each of the back ones and everything worked fine
Don

The OP is asking about an RT, very different circuit and monitoring system.

 

[Bob Denman]

:agree: Somebody in here once mentioned that the GS/RS bikes had to read about 10,000 line of code while booting up.
The RTS: over 100,000 lines! :shocked:

 

[SPYD3R]

LED's

maybe i'm missing something here, but i've ADDED LIGHTS (LED's) to my '09 RS and have NEVER had any issues with Angel Nanny.....

check out the pix of my 3rd Brake Lite and the 2 LED's on my tag....

somebody please tell me what i did CORRECTLY.... also, i never used any 'resisters' etc.....
DAN P
EASLEY, SC
SPYD3R

 

[Chupaca]

They are different..!!

the RS and the RT.. Check with our sponsors for led lights. They have had to deal with this all the time...:thumbup: