Rear passenger armrests

[Doc McCoy]

Going to three wheels and one concern my wife has riding in the back is the lack of passenger arm rests which our 1985 Goldwing had. Has anyone put on aftermarket rests and if so how do you like them.

 

[wmh9680]

Here is a link to my search ?.
http://www.spyderlovers.com/forums/...rome-Passenger-armrests&p=1157446#post1157446

I liked the ISCI ones but they do not make them for the RT.
We got the ShowChrome ones and she loves them. Mike

 

[jerpinoy]

:congrats: and :welcome: I'm sure you'll find some armrest for your passenger.

 

[Bam Bam and Pebbles]

I have the Diamond R Web armrests and my wife loves em. Good and solid, easy to install.

 

[currin20fan]

Armrests

I also have the armrests from Diamond R. I really like them and customer service is the greatest.

 

[Red RT-S]

Arm Rests

I have Corbin arm rests and am less than satisfied. Took a long time to receive them after I ordered them and the installation instructions were wrong. They say there are 2 screws in the trunk that hold the side covers on. There are actually 3 screws, and one is hidden down low in the darkest recess of the trunk. Also, the pre-drilled and reinforced screw holes in arm rests did not line up with the screw holes in the side of the trunk.

 

[trikerbiker645]

Show Chrome for ours, does the job though you still don't want to use them as a get on/off support even though they are somewhat attached to the frame instead of the plastic trunk type. safe riding!

 

[PistonBlown]

Going to three wheels and one concern my wife has riding in the back is the lack of passenger arm rests which our 1985 Goldwing had. Has anyone put on aftermarket rests and if so how do you like them.

Hi Doc McCoy,

What model Spyder do you have?

Noticed you had posted under the GS/RS forum but most who had replied have RT's. So the ones wmh9680 mentions fit a GS/RS but not a RT, while the ones Bam Bam and Pebbles mention fit a RT but not a GS/RS. Of course if you have an F3 then neither of those solutions are suitable

Thanks,

Jos

 

[Bam Bam and Pebbles]

Hi Doc McCoy,

What model Spyder do you have?

Noticed you had posted under the GS/RS forum but most who had replied have RT's. So the ones wmh9680 mentions fit a GS/RS but not a RT, while the ones Bam Bam and Pebbles mention fit a RT but not a GS/RS. Of course if you have an F3 then neither of those solutions are suitable

Thanks,

Jos

You are correct Sir. Didn't notice what forum I was on. My bad.