Pulling rear tire

[Pampurrs]

Hi,
Yes remove air level sensor lever upper bolt (10mm socket and 10mm wrench on nut).
Let air out of blatter.
Remove rear axel cotter key & 36mm nut (100 ft # tight).
Jack up rear wheel.
Remove lower rear shock bolt (15mm).
Remove 2 (15 mm) bolts holding rear Brimbo brake caliper, support the rear caliper.
Pull axel bolt.
You only need to remove rear brake disc from rear wheel.
Note: Discount tire will mount your new rear tire for about $8.
Put 16 oz of Ride-On in rear tire to balance it while riding.
Re-assemble rear wheel.
Enjoy your beautiful ride coming up!!
The 2014 Spyder RT's are awesome!!
Jim

Question: How do you let the air out of the Bladder?

 

[Roadster Renovations]

wow, I had forgot about this thread from last year! You should have a bleed valve under the seat.

 

[Pampurrs]

wow, I had forgot about this thread from last year! You should have a bleed valve under the seat.

Sorry for the resurrection. I've been searching the topic to get as much info as possible.

Pam

 

[IdahoMtnSpyder]

wow, I had forgot about this thread from last year! You should have a bleed valve under the seat.

You're referring to the Schrader valve, right?

 

[Roadster Renovations]

You're referring to the Schrader valve, right?

Yes.

 

[Pampurrs]

wow, I had forgot about this thread from last year! You should have a bleed valve under the seat.

Can you give me an idea of where this would be under the seat? I've peered under there, but nothing grabs my attention.

Thanks,

Pam

 

[BLUEKNIGHT911]

WHAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAT

Can you give me an idea of where this would be under the seat? I've peered under there, but nothing grabs my attention.

Thanks,

Pam

.............It's better known as a Schrader valve ( like where you put air in your tires with ) it's just in front of the Brake fluid containers............It probably has a cap on it
MIKE :thumbup: