SteveandBelinda
Member
I have a 2014 RT Limited that I just purchased about a month ago. Had the 3000 mile inspection done, and was told everything was good. Was just checking in the garage tonight, and noticed that I do not hear the air compressor put air into the rear or hear any air release when adjusted to do so. So I manually emptied the rear air bag, and started bike and adjusted all the way up, then checked with air gauge because I did not feel the bike rise, and no air went into the airbag. Still showed 0psi
I read the manual and noticed that while adjusting sitting still all the following conditions have to be met for the compressor to work: 1. Bike started, 2. Neutral 3. Emergency Brake Off, 4. Brake applied
I went back out in garage and checked everything out again, while the above conditions were met, and still no operation of the compressor.
Any ideas? The lcd screen shows 1 step increments when I toggle the switch in either direction, but does nothing. Thought maybe a fuse, but don't see one listed in manual. Only thing that I have personally done recently was to swap fuse #6 & #7, so I have continious power to trunk.
I read the manual and noticed that while adjusting sitting still all the following conditions have to be met for the compressor to work: 1. Bike started, 2. Neutral 3. Emergency Brake Off, 4. Brake applied
I went back out in garage and checked everything out again, while the above conditions were met, and still no operation of the compressor.
Any ideas? The lcd screen shows 1 step increments when I toggle the switch in either direction, but does nothing. Thought maybe a fuse, but don't see one listed in manual. Only thing that I have personally done recently was to swap fuse #6 & #7, so I have continious power to trunk.