• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Phone mount for ST?

hestonkent

New member
Hey all,

New to the forums here, been riding spyders for a while though. Love my RS-S.

Anyways, my dad's got an ST and I wanted to get him a phone mount for father's day, however I cannot find anything made specifically for the ST model - only the RT's. I was looking at this mount: https://www.amazon.com/Techmount-4-...1466370254&sr=8-1&keywords=spyder+phone+mount

Does anyone here own an ST and have a phone mount setup for theirs? If I can't find a pre-built one i'll probably just end up 3D modeling/printing my own adapter for the mount specifically for the ST bolt spacing, but i'd rather not have to spend the time doing it if there's something out there that isn't over like $60.

Additionally, if anyone here owns an RT and wouldn't mind shooting me over the measurements for the distance between the bottom two bolts on their steering/handle bar attachment, that'd be awesome. :)
 
I have a factory installed Garmin GPS on my St-LTD. where would I install the ram mount on my handlebar and which model of the RAM mount would work?


Sent from my iPhone using Tapatalk
 
I have this on my ST-S

The part number for the Yoke Clamp, now a handlebar clamp for the Spyder ST is RAM-B-108B or RAM-B-108B-STRAP40U, depending on how the website chooses to identify the part. A (somewhat out of focus) picture (from the rear) of one of these clamps mounted on my 2013 Spyder ST is included below:
img_1719.jpg
 
Hey all,

New to the forums here, been riding spyders for a while though. Love my RS-S.

Anyways, my dad's got an ST and I wanted to get him a phone mount for father's day, however I cannot find anything made specifically for the ST model - only the RT's. I was looking at this mount: https://www.amazon.com/Techmount-4-...1466370254&sr=8-1&keywords=spyder+phone+mount

Does anyone here own an ST and have a phone mount setup for theirs? If I can't find a pre-built one i'll probably just end up 3D modeling/printing my own adapter for the mount specifically for the ST bolt spacing, but i'd rather not have to spend the time doing it if there's something out there that isn't over like $60.

Additionally, if anyone here owns an RT and wouldn't mind shooting me over the measurements for the distance between the bottom two bolts on their steering/handle bar attachment, that'd be awesome. :)
I was looking at that same one lol I just got my can am this pass weekend a 2014 sts and i can't find anything for this bike

Sent from my SM-N910T using Tapatalk
 
The part number for the Yoke Clamp, now a handlebar clamp for the Spyder ST is RAM-B-108B or RAM-B-108B-STRAP40U, depending on how the website chooses to identify the part. A (somewhat out of focus) picture (from the rear) of one of these clamps mounted on my 2013 Spyder ST is included below:
img_1719.jpg

Ok. Thank you. I'll look into this one.


Sent from my iPhone using Tapatalk
 
I got a Rivco drink holder mount (no cup holder) and with some RAM parts and RAM X-grip. Mounting phone or GPS works great.

dcdd73982647a3e94178c0347a69bcf4.jpg



Sent from my iPhone using Tapatalk

Susie - 2013 Spyder ST-Ltd
Flame Red '04 GL1800
'97 GL1500
'95 GL1500
'89 GL1500
'83 GL1100
 
GPS Mount...

Hey all,

New to the forums here, been riding spyders for a while though. Love my RS-S.

Anyways, my dad's got an ST and I wanted to get him a phone mount for father's day, however I cannot find anything made specifically for the ST model - only the RT's. I was looking at this mount: https://www.amazon.com/Techmount-4-...1466370254&sr=8-1&keywords=spyder+phone+mount

Does anyone here own an ST and have a phone mount setup for theirs? If I can't find a pre-built one i'll probably just end up 3D modeling/printing my own adapter for the mount specifically for the ST bolt spacing, but i'd rather not have to spend the time doing it if there's something out there that isn't over like $60.

Additionally, if anyone here owns an RT and wouldn't mind shooting me over the measurements for the distance between the bottom two bolts on their steering/handle bar attachment, that'd be awesome. :)

I'm very happy with this one on my RSS... https://www.amazon.com/gp/product/B013MDDEDG/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1 ... I had to go with a longer clamp screw, but I like the fact that the tether doesn't block the screen and it is rock solid... David
 
Anything you buy from Lamonster is worth every penny and comes highly recommended. I didn't know about their mount when I bought mine so I pieced mine together from value accessories (sponsored link)
 
I wouldn't trust any magnetic holder with my $$$ phone.

I use RAM mounts.

This might work on the handlebar.
https://m.summitracing.com/parts/rm...9tyUFD8jWKoThM5bXO6cURr-phhJdcnWMgRoCdkbw_wcB

I use a Ram adhesive base with 1" ball along with short arm and X-grip. I have it stuck to the inside of the windshield and with some furniture felt padding, the arm and x-grip rest on the dash so it doesn't bounce around. Two safety straps from each windshield brackets to the base of the x-grip just in case something gets loose.

73081b463812a9f3ced2e814662ebc84.jpg



Sent from my iPhone using Tapatalk

Susie - 2013 Spyder ST-Ltd
Flame Red '04 GL1800
'97 GL1500
'95 GL1500
'89 GL1500
'83 GL1100
 
Hey all,

New to the forums here, been riding spyders for a while though. Love my RS-S.

Anyways, my dad's got an ST and I wanted to get him a phone mount for father's day, however I cannot find anything made specifically for the ST model - only the RT's. I was looking at this mount: https://www.amazon.com/Techmount-4-...1466370254&sr=8-1&keywords=spyder+phone+mount

Does anyone here own an ST and have a phone mount setup for theirs? If I can't find a pre-built one i'll probably just end up 3D modeling/printing my own adapter for the mount specifically for the ST bolt spacing, but i'd rather not have to spend the time doing it if there's something out there that isn't over like $60.

Additionally, if anyone here owns an RT and wouldn't mind shooting me over the measurements for the distance between the bottom two bolts on their steering/handle bar attachment, that'd be awesome. :)
Go to Leader motorcycle.com
This is where I got mine for my RT.
They have them for all models. Quality products made I USA.
Hope this is helpful.
 
phone mount

My wife has a 2014 st-s, she had the clamp mount for about 2 years and it worked great. Then one day last month the mode button would not work, So could not started. Sdyder had to be towed to dealer and they found the clamp had pinched the wires in handle bar. Long story short, the whole mode assembly had to be replaced at a cost of 800 dollars. I found a great web site with all kinds of ram mounts { Providence spyder.com } . So all of you using the camp mount check make sure wires are not being pinched. Wires are very thin. :yikes:
 
Back
Top