• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Passenger armrests

wmh9680

wmh9680

New member
Hi, I posted a while back a question about Passenger armrests. I got a few responses but I need more info to make a choice. My wife has had 2 spinal fusions and I should have my right knee replaced and both shoulders operated on. That is why we went to the spyder from 2 wheels. I have loved it since I first saw it. Karen really needs something to make her feel safe and comfortable on the spyder (2014 RT Limited-she loves it too). I'm looking for something sturdy and that will not swing out. Any recommendations and anyone near the south suburbs of Chicago that has some installed. Thanks, Mike
 
Arm rests

Hi was looking on forum saw a old post on arm rests. It shows arm rests that swing up not out. Might give you more
sense of not falling off. Do a search for arm rests. But these are sold by wing stuff. So google wing stuff and do a search.

Good luck Bob
 
Armrests that "lock" you into place might not actually be your best choice. nojoke
If things go sour: you want the ability to get away from the bike quickly. (If that turns out to be the best choice...)
You can tighten the pivot screws on the armrests, and that makes them feel more secure. :thumbup:
 
Arm Rests

I have the Corbin arm rests, and while they seem to work well, I am not very satisfied with Corbin. First, I think it took a very long time to receive the arm rests, considering that they are an off the shelf item as opposed to something custom made. Second, the installation instructions were not very good. To install them you need to remove the rear speaker enclosures. The instructions say there are 2 screws that secure the speaker enclosures. This is incorrect, there are 3 screws, and the 3rd one is very deep in the rear trunk making it difficult to see if you aren't looking for it. Third, the reinforced points on the arm rests where the screws go into the arm rest did not line up with the holes in the rear trunk, so the screws had to be screwed into the unreinforced material that forms the arm rest. This results in the arm rest being less secure. I have to remind my wife not to use the arm rest to help her get up out of the seat to get off the bike.
 
Still learning how to use the forum so please bear with me. I used to be on 3 Virago forums (I was one of the first on ViragoTech.com) and a Honda and a Suzuki forum but each one is a little different. Check out my pics in my album. I had Honda armrests on my Voyager and Love Handles (custom made--$400) in my Virago to make her more comfortable

I showed my wife the Corbins and she did not like them (so you know where that goes). Also trying to get her to not put all of her weight on them will be a problem (even though she is only 120lbs). I've seen the Rivco and ShowChrome and like them both. I think the ShowChrome mount under the seat which might be more study.

Thanks, Mike
 
Arm Rest are not a Safety Device.

Don't count on armrest to provide any measure of safety. I've had Corbin and Ultimate (made by Rivco) armrests and both screw into plastic and have no firm support if you lean on them or push them down while getting on or off. I had the screws pull out of the Corbin rest from my wife pushing down on them while getting on and off. The Ultimate are mounted with rubber compression plug fasteners. They will pull out of the plastic speaker housing very easily. I have plans on modifying my Ultimate (same as Rivco) arm rest mounting. When I get some time I am going to make a formed steel support the goes completely behind the seat back rest and connects to both armrest brackets to give them more support.
 
Diamond R Armrests

We have the diamond R web style armrests on the RT. They mount under the seat with existing bolts. They seem very sturdy and are mounted metal to metal. Easy to mount yourself. Very well made and can be adjusted for easy swing out.
They do no move when riding solo, wife seems to enjoy them. Good luck Bob. Sorry not smart enough to post a link.
 
Dr Buck has a good idea to try with the Rivco rests. I have them and my wife likes them, but I hate the idea of her forgetting to not put much weight on them....ugh.. I could see a very expensive piece of plastic getting busted from the mount system the Rivcos have. She's 120lbs too, but one wrong move..and crack....So far so good. I snugged up the pivot bolt a bit on ours, but if ya go too tight, then it puts all the stress on the plastic/speaker boxes. So, going much tighter isn't an option. In a crash or sudden movement, I wouldn't rely on the rests to be any form of restraint system. I think a solid mount will make it harder to mount/dismount for the passenger, but to each their own.
 
You must log in or register to reply here.

Similar threads

B
Passenger armrest recommendations? 2015 RTS
Replies
0
Views
431
Bcubed
B
C
Any options for giving passenger a backrest and armrests?
Replies
6
Views
1K
ARtraveler
ARtraveler
T
22 Spyder RT Brake issues - EBC Rotor larger than OEM & abnormal/uneven pad wear. Does any of this make sense?
Replies
16
Views
737
BajaRon
BajaRon
J
After Guidance/opinions on Passenger Arm Rests for F3-Limited?
Replies
3
Views
2K
Mikey
Mikey
Steveg3927
Any ideas for unused passenger heated grips circuit and switch?
Replies
6
Views
1K
IGETAROUND
IGETAROUND
Back
Top