-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Oil Sump Capacity
- Thread starter A1A
- Start date
ulflyer
Active member
Jim&Teresa
New member
2nd Oil Change at 10,000 miles
Completed 2nd oil change with filter recently. I used the "recommended oil quantity" per Lamont's chart (http://www.spyderlovers.com/forums/s...il-recommended Post 13) below:
Less oil recommended per chart below:
4.7L = 5 quarts and that's what I put into the engine. Just got back from a 30 mile run and checked oil level.
FYI - oil level on dipstick: It is showing at the "low" mark on the dipstick.
Since the 2014 RT has been AWESOME and has not used a drop of oil, I will monitor this level and insure it does not go below that mark. IF this is the new recommended oil level, then why do we use "old" measuring dipsticks. It would seem a new dipstick by BRP is in order here to insure we follow proper oil levels in our engines on the 1330's. IMHO !
Completed 2nd oil change with filter recently. I used the "recommended oil quantity" per Lamont's chart (http://www.spyderlovers.com/forums/s...il-recommended Post 13) below:
Less oil recommended per chart below:
4.7L = 5 quarts and that's what I put into the engine. Just got back from a 30 mile run and checked oil level.
FYI - oil level on dipstick: It is showing at the "low" mark on the dipstick.
Since the 2014 RT has been AWESOME and has not used a drop of oil, I will monitor this level and insure it does not go below that mark. IF this is the new recommended oil level, then why do we use "old" measuring dipsticks. It would seem a new dipstick by BRP is in order here to insure we follow proper oil levels in our engines on the 1330's. IMHO !
Last edited:
pps: I meant to say. what is the Oil Tank Capacity in accordance with the shop manuel?
Similar threads
