-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
New Supporting Vendor- Baker Built AirWings
- Thread starter Lamonster
- Start date
GloryRyders
MOgang Member
welcome, looking forward to seeing your products at :spyder2:fest.
pwilbarger
New member
Screwed!
Anticipating the return of my RT-S from the dealer I ordered BB Air Wings for it. I really liked them on my Gold Wing. They arrived in about a week and the instructions seemed fairly clear. The day after the RT-S returned I set out about the install. Removed the middle panels and removed the right torks screw to mount the top bracket. Put the bracket in and tried to reinstall the existing screw as instructed. It's way too short at about 20mm. It needs to be at least 30mm if not 35mm. The left side is the same. I called Baker Built and talked to the general manager. I was told that this worked out okay on the protype RT and he just installed a set at Bike Week and it worked just fine. I was instructed to buy longer screws and they will have to start including longer screws in the kit. Not much help for me. I have had no luck trying find the M8 x 1.00 (fine pitch) x 35mm on line. I can find all kinds of coarse (1.25 pitch) screws but no fine pitch. It may be even finer than 1.00, I'm not sure. I will go to the local Fastnal store next week. Anyone else have thoughts on where to get the longer screws?
Anticipating the return of my RT-S from the dealer I ordered BB Air Wings for it. I really liked them on my Gold Wing. They arrived in about a week and the instructions seemed fairly clear. The day after the RT-S returned I set out about the install. Removed the middle panels and removed the right torks screw to mount the top bracket. Put the bracket in and tried to reinstall the existing screw as instructed. It's way too short at about 20mm. It needs to be at least 30mm if not 35mm. The left side is the same. I called Baker Built and talked to the general manager. I was told that this worked out okay on the protype RT and he just installed a set at Bike Week and it worked just fine. I was instructed to buy longer screws and they will have to start including longer screws in the kit. Not much help for me. I have had no luck trying find the M8 x 1.00 (fine pitch) x 35mm on line. I can find all kinds of coarse (1.25 pitch) screws but no fine pitch. It may be even finer than 1.00, I'm not sure. I will go to the local Fastnal store next week. Anyone else have thoughts on where to get the longer screws?
Sny
New member
Bolt Depot has always been good for this kinda thing in small quantities
Similar threads
