New Spyder Cometh Questions

[nvsofu nj]

Hello All !!!!!

Gary from Monmouth County,New Jersey

Looking to pick up my new baby (2016 Can am Spyder RTS) on Thursday, and was just wondering if there is anything that one should look for on a pure-delivery inspection ?????? Thoughts on the BEST warranty !!!!!!


Thanks all !!!!!!!

 

[Bob Denman]

:welcome:
Check the rear tire condition: pay close attention to the center sectoin of tread.
(After it's been driven straight ahead for about 30 feet or so...): take a look at where the belt is riding on the rear pulley. it should be "JUST" off the inner flange.
What extra "stuff" has been added to the bike? Check to make sure that everything functions as it should.
Ask about when it was last serviced. The 1330s should see an oil change each 9,300 miles, or yearly: whichever comes first!

1330club

 

[Trbayth]

It's not obvious from your post if you've bought it privately used, from a dealer used, or from a dealer as a new left-over.

If from a dealer as a new left-over, check the front wheels to make sure they're mounted on the correct sides (the front tires are directional.) I remember we had someone a while back who posted his new bike as it was being assembled by the dealer and the front wheels were mounted on the wrong sides.

Oh, and :welcome:

 

[PrairieSpyder]

:welcome: & :congrats: on your new RTS.

If you haven't already, read the Do's and Don'ts thread here.

 

[loisk]

Check tyre pressures for yourself - and rear air bag pressure, if it has one.

 

[Chupaca]

Tough one...

If you are not familiar with the spyders it is tough. The visual walk around to see there is no damage to the body panels, rims etc. Make sure you have two keys, tools and the owners manual. Check fluid levels and tire pressure and fire her up and give her a spin. The directional tires check mentioned above is good call as well. The take a picture and post it here....:roflblack:

 

[murphybrown]

Welcome, Wecome & Welcome

You have come to the best folks for all things SPYDER...glad you found us. Now ryde your :spyder2: like there is no tomorrow... Miles of smiles are guaranteed. :thumbup::yes:

 

[Lew L]

Test ride????

Safely remove hands while rolling to see if it pulls left or right. Also test at speed to feel if tires are balanced.

:congrats: and :welcome:


Kaos

 

[ARtraveler]

:welcome: The previous posters have you covered on what to look for. The do's and don'ts will be very helpful. First sticky in the general forum. :yes:

Here is a link: http://www.spyderlovers.com/forums/...t-Do-s-and-Do-Nots-quot-for-new-Spyder-owners

 

[Deanna777]

:welcome: 1330club :nopic:

After you pick-up your spyder, get a laser alignment.

Be sure everything works correctly, before you leave the dealership.

Deanna

 

[Centurion]

Check tyre pressures for yourself - and rear air bag pressure, if it has one.

:agree: many folks have posted about initial poor performance only later to discover that their tire pressure was way off leaving the dealership.

 

[Roadster Renovations]

:welcome::congrats: on the new ryde!!

 

[d.o.spyder-rts]

:congratsn your spyder and :welcome:to the spyder web. Dale

 

[A1A]

:congrats: on your :spyder2: purchase, ryde safe. Make sure there is a Tool Pouch under the seat.