SNOOPY
Active member
I followed his list for the most part, but one of the numbers isn't even available from BRP so I had to guess at the proper number they suggested, we'll see.
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
New Side panels
- Thread starter Sny
- Start date
I followed his list for the most part, but one of the numbers isn't even available from BRP so I had to guess at the proper number they suggested, we'll see.
flamingobabe
...in the pink (Girls On Spyders)
Snoopy....you were told numerous times that the part ending in 069...should be 079...quit pushing the blame on someone else....I copied the list...then did research my self and my conclusion was exactly the same...I have the parts and they are correct.....
Bob Denman
New member
Char,
Is their installation going to happen before, or after; SpyderFest? :dontknow:
Or is it just on the, "Round-Tuit" list?
Is their installation going to happen before, or after; SpyderFest? :dontknow:
Or is it just on the, "Round-Tuit" list?
Last edited:
SNOOPY
Active member
Not blaming. I just still don't know which number is being sent?
I thought I did the change people were speaking of (079?) but it wasn't available?
Maybe it was the 069?, it is all confusing to me...I'll see when the parts show up. Lol
Bob Denman
New member
SNOOPY
Active member
Bob Denman
New member
March 28th?
Just over two weeks... you should be getting your parts soon! :thumbup:
This is a very interesting topic; I think that lots of folks are waiting to see if the scoops help... I think that they will; but we need some actual experiences with them to be reported in here! :2thumbs:
Just over two weeks... you should be getting your parts soon! :thumbup:
This is a very interesting topic; I think that lots of folks are waiting to see if the scoops help... I think that they will; but we need some actual experiences with them to be reported in here! :2thumbs:
Curious
Like so many of you, I too am very curious to see how Carl and others like the new side panels once the weather gets warmer. And, like so many of you, am wondering if BRP will actually do anything about this on their end... including, as someone mentioned, at the very least, making the 2013 colors available in the 2014 panel parts.
A question... I was told by my dealer (I had it shipped to VA from MN) that the Service Bulletin 2013-9 was done. Is there an easy way I can visually verify if this is true? My brand new 2013 ST SE5 runs awfully hot, and it's got only a few miles on it, and those are mostly just parking lot and neighborhood practice rides.
Like so many of you, I too am very curious to see how Carl and others like the new side panels once the weather gets warmer. And, like so many of you, am wondering if BRP will actually do anything about this on their end... including, as someone mentioned, at the very least, making the 2013 colors available in the 2014 panel parts.
A question... I was told by my dealer (I had it shipped to VA from MN) that the Service Bulletin 2013-9 was done. Is there an easy way I can visually verify if this is true? My brand new 2013 ST SE5 runs awfully hot, and it's got only a few miles on it, and those are mostly just parking lot and neighborhood practice rides.
Bob Denman
New member
The rides in parking lots and neighborhoods might just not be fast enough, to get enough airflow through the bike.
I would say, try it out at speed on the highway, before starting to get worried about anything... :shocked:
I would say, try it out at speed on the highway, before starting to get worried about anything... :shocked:
flamingobabe
...in the pink (Girls On Spyders)
Bob...the parts will be installed before I leave for Spyderfest....waiting on torx screw and nut
STicks....the service bulletin is a computer update to the ECM...to answer your question ...no
as far as ordering the parts to update to 2014 air-flow panels.....so many are ordering...BRP has run out and needs to make new ones...if you go to BRP site some of the parts say unavailable......I did hear a rumor that the 2013 colors will be available
STicks....the service bulletin is a computer update to the ECM...to answer your question ...no
as far as ordering the parts to update to 2014 air-flow panels.....so many are ordering...BRP has run out and needs to make new ones...if you go to BRP site some of the parts say unavailable......I did hear a rumor that the 2013 colors will be available
ARCTIC
New member
I looked up every part in this list but the decal x2 with the correct part number and my source shows $694.20 .
Shoot me a pm if you want to know where. The site says free shipping but could be a charge for bulky orders. Does anyone have any results to report on the kit? Is removing the cat a better solution? It would be cheaper
Side Panel Confusion
Thanks Flamingobabe and Bob.
Another question...
On the list of parts needed for the panel swap, I see there are "LH Upper Side Panel" and "RH Upper Side Panel", as well as RH and LH "Front Panels." But, on the lists provided in the thread, there is a second set of "Upper Side Panels" under different part numbers. One set shows color, the other doesn't. I thought we needed to get four panels. This makes six. :dontknow:
Thanks Flamingobabe and Bob.
Another question...
On the list of parts needed for the panel swap, I see there are "LH Upper Side Panel" and "RH Upper Side Panel", as well as RH and LH "Front Panels." But, on the lists provided in the thread, there is a second set of "Upper Side Panels" under different part numbers. One set shows color, the other doesn't. I thought we needed to get four panels. This makes six. :dontknow:
flamingobabe
...in the pink (Girls On Spyders)
705007329 705007330 are the black pieces that fit in for fog light area...and 250000069...should be 250000079..and they come in a package of 10.....if you want one...you will have to go through a dealer........be sure to order 2 decals
Last edited:
SNOOPY
Active member
Powersportswarehouse.com was around that price plus shipping, don't remember the exact numbers.
I think there is a backorder or some parts though because it is taking a while.
Sent an email today for an update.
Bob Denman
New member
Char,
I am SOOOO glad to hear that this project might be coming to an end for you! :yes:
hyea::yes:
Here's to hoping that it's smooth sailing from now on! :cheers: :thumbup:
I am SOOOO glad to hear that this project might be coming to an end for you! :yes:
hyea::yes:Here's to hoping that it's smooth sailing from now on! :cheers: :thumbup:
SNOOPY
Active member
Finally got my panels in.
That took quite a while, BRP must have a good backorder on some parts.
Finally got my panels in.
That took quite a while, BRP must have a good backorder on some parts.
Congratulations. Good to know you got them, finally! :clap:
quickster47
New member
Yesterday my wife and I rode down to South Pittsburg, TN for the National Cornbread Festival. This was the first time we have ridden our 2013 ST-S with the new panels for more than 200 miles with temperatures higher than 70 degrees.
On the ride yesterday we had temps in the mid 80s and I must say the new panels definitely make a difference in keeping the bike cooler. There is still some hot air getting trapped under the tupperware but nothing like it was before. Perhaps it is now time to cut some 4" holes in the very bottom panels, or just remove them to let that air out.
I am very pleased with the conversion and can recommend it whole heartedly to anyone that has an ST-S.
Carl
On the ride yesterday we had temps in the mid 80s and I must say the new panels definitely make a difference in keeping the bike cooler. There is still some hot air getting trapped under the tupperware but nothing like it was before. Perhaps it is now time to cut some 4" holes in the very bottom panels, or just remove them to let that air out.
I am very pleased with the conversion and can recommend it whole heartedly to anyone that has an ST-S.
Carl
JacqueTanis
New member
This list is for the Pearl White Panels from FlamingoBabe ...
Part # Description Qnty
250000079 Panel Nut M5 X 0.8. Model-ST 1
250000577 Torx Screw K40 X 12 4
517302785 Clip 1
704903140 Can-Am Decal for White Model 1
705007329 LH Upper Side Panel 1
705007330 RH Upper Side Panel 1
705007700 Vegas White Pearl LH Front Panel 1
705007706 Vegas White Pearl RH Front Panel 1
705007737 Vegas White Pearl LH Upper Side Panel 1
705007738 Vegas White Pearl RH Upper Side Panel 1
518327600 LH Upper Side Panel Foam 1
518325518 RH Upper Side Panel Foam 1
You will need the 2 decals this is for white…look up the black….. paint touch says 2013 and 2014 same,,,pearl white
704903140 $33.98 Can-Am Decal for White Model-2
Similar threads
- Sticky