New back tire. Short valve stem. Do extenders exist that work?

[acdcking12]

So like I said, new back tire, but the valve stem is really short, and I struggled to get the PSI down from 30-18 because it took some finangling to get something on it due to where it is at.

So 15 minutes to get the pressure where I wanted it. So do these kind of things exist? Or not?

 

[Triniman]

You can purchase extenders at any parts store.

 

[BLUEKNIGHT911]

So like I said, new back tire, but the valve stem is really short, and I struggled to get the PSI down from 30-18 because it took some finangling to get something on it due to where it is at.

So 15 minutes to get the pressure where I wanted it. So do these kind of things exist? Or not?

Whoever did the tire swap should have put on one that was a little longer ..... JMHO .... Glad you using 18 PSI .... Mike :thumbup:

 

[CopperSpyder]

Try a search on Amazon (tire valve extender)

 

[acdcking12]

Try a search on Amazon (tire valve extender)

I should have done that. But I look for your guys guidance. You all always get me going in the right direction.

 

[pegasus1300]

Go to your nearest Harley store, It's fun anyway just to see all the pretty new Harleys. Ask for a rear tire valve extender. They use them on Ultras to check the rear tire. Last time I checked they were about $11. You can screw it on when you want to check the rear tire pressure.

 

[Gwolf]

Get a trigger type hookup for the compressor hose with a gauge on it, so you can clip it to the valve stem and adjust the pressure with the air still hooked up. Get it where you want it, just un-clip the hose and ride. 5 minute job and don't need 4 hands to do it.

 

[2dogs]

This has been posted many times before. Here is the correct tool with the correct angle to air up your spyder's rear tire.
https://www.harborfreight.com/exten...MIqMfjgLjVgQMVjwytBh0QEQ25EAQYBiABEgKq3PD_BwE
And here's a tire pressure gauge that's also compatible with the correct angle needed.
https://jacosuperiorproducts.com/pr...MIquiL2LnVgQMVMIHCCB1cUwqsEAQYAyABEgJeAvD_BwE

 

[oldguyinTX]

This is great for adjusting tire pressure up or down. Easily adds air and bleeds air. It clips on to the valve stem so you don't have to remove it until you are done. No need for a valve extender or angled air chuck. I find that if I get my valve stem right at 5 o'clock, I can easily attach it and remove it. Also useful for tires on your cage. One of my best investments.

https://www.amazon.com/dp/B07C25C4CQ?ref=nb_sb_ss_w_as-reorder-t1_k1_1_5&amp=&crid=3CDKQM5ANW6Q5&amp=&sprefix=jaco+

 

[2dogs]

Short of installing an accessible valve stem on the other side of the rim, you just have to overcome the struggle of airing up that rear tire the way it is by becoming creative and resourceful. Lord knows if I can do it you can do it. If I can no longer air up my tires then's the time to give up riding.

 

[Pooch]

This is great for adjusting tire pressure up or down. Easily adds air and bleeds air. It clips on to the valve stem so you don't have to remove it until you are done. No need for a valve extender or angled air chuck. I find that if I get my valve stem right at 5 o'clock, I can easily attach it and remove it. Also useful for tires on your cage. One of my best investments.

https://www.amazon.com/dp/B07C25C4CQ?ref=nb_sb_ss_w_as-reorder-t1_k1_1_5&=&crid=3CDKQM5ANW6Q5&=&sprefix=jaco+

:agree: This is a great tool.

 

[BLUEKNIGHT911]

Short of installing an accessible valve stem on the other side of the rim, you just have to overcome the struggle of airing up that rear tire the way it is by becoming creative and resourceful. Lord knows if I can do it you can do it. If I can no longer air up my tires then's the time to give up riding.

I was the first one here to move the Schrader valve to the disk side of the wheel .... The first time I did it, after the mechanic removed the rear tire from the wheel I took it home and did the drilling and adding the new angle valve .... for my other two, I just brought a battery drill & bit and did it while there in the shop. ... it took all of five minutes .... Mike :thumbup:

 

[askitee]

Whoever did the tire swap should have put on one that was a little longer ..... JMHO .... Glad you using 18 PSI .... Mike :thumbup:

and balanced the wheel with the extender on

 

[BLUEKNIGHT911]

and balanced the wheel with the extender on

From what others have reported here MOST tire shops can't balance the Rear wheel ..... However in my experience ( and others here ) the Rear wheel and tire don't NEED to balanced .... Mike :thumbup:

 

[gkamer]

This is great for adjusting tire pressure up or down. Easily adds air and bleeds air. It clips on to the valve stem so you don't have to remove it until you are done. No need for a valve extender or angled air chuck. I find that if I get my valve stem right at 5 o'clock, I can easily attach it and remove it. Also useful for tires on your cage. One of my best investments.

https://www.amazon.com/dp/B07C25C4CQ?ref=nb_sb_ss_w_as-reorder-t1_k1_1_5&=&crid=3CDKQM5ANW6Q5&=&sprefix=jaco+

That's the one I use. I like the digital readout verse the kind with the needle type gauge.

 

[2dogs]

From what others have reported here MOST tire shops can't balance the Rear wheel ..... However in my experience ( and others here ) the Rear wheel and tire don't NEED to balanced .... Mike :thumbup:

Right on Mike, the belt vibration masks the tire vibration if there is any. :roflblack: hyea:

 

[old Timer]

This is great for adjusting tire pressure up or down. Easily adds air and bleeds air. It clips on to the valve stem so you don't have to remove it until you are done. No need for a valve extender or angled air chuck. I find that if I get my valve stem right at 5 o'clock, I can easily attach it and remove it. Also useful for tires on your cage. One of my best investments.

https://www.amazon.com/dp/B07C25C4CQ?ref=nb_sb_ss_w_as-reorder-t1_k1_1_5&=&crid=3CDKQM5ANW6Q5&=&sprefix=jaco+

Just bought one of those from Amazon, received it yesterday and wow it works great , no need for an extender, a piece of cake to use for this 80 year old.

Thanks for the suggestion, I can do all 3 tires in no time at all. A definite 'Must Have'.

 

[acdcking12]

Just bought one of those from Amazon, received it yesterday and wow it works great , no need for an extender, a piece of cake to use for this 80 year old.

Thanks for the suggestion, I can do all 3 tires in no time at all. A definite 'Must Have'.

Probably wont work for me since I do not have an air compressor. I might need to get one, I guess

 

[Isopedella]

Probably wont work for me since I do not have an air compressor. I might need to get one, I guess

Yep. If ya have room for it its worth its weight in the gold stuff. I dont run mine until I am doing some work requiring some air. Check the pressures and adjust if ya have to before you leave home and all sorts of other uses.

Those snap on gauges, trigger type hookup. Yes they are great but the pressure dials are off the clock. I have one but swapped the dial out for an 0 - 60 p.s.i. Much easier to set to the lower pressures of these Spyders.

 

[Gwolf]

Probably wont work for me since I do not have an air compressor. I might need to get one, I guess

Yeah, you gotta have air compressor for that, but if you look around on the web or tool stores, you can find some nice, dependable, small, air compressors. They are very light weight, tankless, and run on household current. Easy to move around, very convenient, and you can get top of the line small portables for less than $100. I have 2 big shop compressors, but just for airing up a couple vehicle tires, I don't bother with dragging out all the heavy duty, stiff air hose. I just grab the small tankless and use an extension cord. For the small tires, you might want a small 12 volt that runs on the battery, to carry with you, but I am working mostly around the shop and have a small portable that plugs in 110 volt outlet, because airing up trucks, trailers, or loader tires takes a little more than the small 12 volts can handle.