• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Need help with fault codes

captblack

New member
Could someone with acess to a manual tell me what these mean?

P0126
P2806 (or maybe 2808)

I'll see the techs here in Durango tomorrow but would like to have an idea of what is going on. BTW I have a 2011 RT SM 5.

Thanks!y
 
Here is the best info I could find. My manual is for a 2010 RT. Don't know if any of the codes may have changed for a 2011.

Found no P0126 code listed. P0127 is Intake Air Temperature Too High. I have had that code a number of times, very common in our heat.

P2806 ECM Gear position Sensor angle defined area vs position not plausible
Damaged circuit wires, damaged GPS, damaged ECM pins, or damaged transmission

P2808 Did not find any such code listed.

Hope this helps but afraid there may be a difference in 2010 and 2011 RT codes.

Cotton
 
Thanks, Cotton.

That is a starting place for sure. I am told that the BRP techs speak French so we will see what happens.

It wvas really hot here today so that may have been the issues... we'll see.

Thanks again!
 
Back
Top