Mud flap leds /into brake light??

[Brevet05]

Hey Ozzie and Spyder in KS,

Got the Mud flaps hooked up to the triple play... and the hardest part about it was wire management... getting the wire loom on from front to back... but overall, no problems...

thanks for the help!!!!

:agree:
Spent about 90 minutes on the connection, most of which was in taking off and replacing the tupperware. I had previously installed the mudflap lights, so this part of the task was just running the wire loom, connecting the wires and voila.
One note, though. I found, on hooking it all up following the Triple Play instruction sheet, that the lights flashed too fast. Fortunately, the good folks at Custom Dynamics included the resistor that slowed the blink rate back to normal. I appreciated the help from the folks on the board. The Army Spyder looks sweet (and highly visible)!hyea:hyea:hyea:

 

[Magic Man]

:agree:
Spent about 90 minutes on the connection, most of which was in taking off and replacing the tupperware. I had previously installed the mudflap lights, so this part of the task was just running the wire loom, connecting the wires and voila.
One note, though. I found, on hooking it all up following the Triple Play instruction sheet, that the lights flashed too fast. Fortunately, the good folks at Custom Dynamics included the resistor that slowed the blink rate back to normal. I appreciated the help from the folks on the board. The Army Spyder looks sweet (and highly visible)!hyea:hyea:hyea:

So you're the one they were asking me about.

Glad it all worked out.

MM

 

[RoadHammer]

So is everyone who did the mudflap to signal/brake lights via the triple play unit, experiencing fast flashing signal lights after the install? or was it just Brevet ?

:agree:
Spent about 90 minutes on the connection, most of which was in taking off and replacing the tupperware. I had previously installed the mudflap lights, so this part of the task was just running the wire loom, connecting the wires and voila.
One note, though. I found, on hooking it all up following the Triple Play instruction sheet, that the lights flashed too fast. Fortunately, the good folks at Custom Dynamics included the resistor that slowed the blink rate back to normal. I appreciated the help from the folks on the board. The Army Spyder looks sweet (and highly visible)!hyea:hyea:hyea:

 

[ozzie]

So is everyone who did the mudflap to signal/brake lights via the triple play unit, experiencing fast flashing signal lights after the install? or was it just Brevet ?

:hun: I don’t notice any faster flashing on the turn signals. But I did have the front led turn signals installed before I did this mod and that comes with a load resister that connects to the triple play - so maybe this is why I didn't have an issue.

 

[BajaRon]

Wow hard crowd. :yikes:

It was a joke! :gaah:

Being up to my eye balls in it most days, having more thing to do on my plate is the last thing I needed. I'm already pulling my hair out and there's not much left! :roflblack:

MM

I want to know when the "Loaner" program is coming back. You know, the "Try it before you Buy it" program.... :roflblack: