heatseek1127
New member
I have an concern if anyone can help me. Can the readings on the speedo be changed from KPH to MPH or MPH to KPH? I work at a car dealer and it is very easy to do this on the GM vehicles.
-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
MPH VS KPH
- Thread starter heatseek1127
- Start date
NancysToy
Motorbike Professor
Yes, it is just a matter of pushing the right buttons. The exact procedure is in the Owner's Manual, which can be accessed from tis forum's home page.
-Scotty
Lamonster
SpyderLovers Founder
Setting Metric/Imperial Units
1. Push and hold SET (S) button for three seconds.
2. Main digital displays scrolling message: PUSH _M_ TO SELECT KM, _S_ TO
SELECT MI
3. Push MODE (M) button to select metric units or SET (S) button to select imperial units.
Setting Clock
1. Press MODE (M) button to select clock display.
2. Push and hold MODE (M) button for three seconds.
3. Press MODE (M) button to select 12:00 AM PM or 24:00 time base.
4. If 12:00 AM PM time base selected, A or P flashes.
press MODE (M) button to select A (AM) or P (PM).
5. Press SET (S) button to change hour.
6. Press MODE (M) button to switch to minute (minute flashes).
7. Press SET (S) button to change minute.
8. Press MODE (M) button.
1. Push and hold SET (S) button for three seconds.
2. Main digital displays scrolling message: PUSH _M_ TO SELECT KM, _S_ TO
SELECT MI
3. Push MODE (M) button to select metric units or SET (S) button to select imperial units.
Setting Clock
1. Press MODE (M) button to select clock display.
2. Push and hold MODE (M) button for three seconds.
3. Press MODE (M) button to select 12:00 AM PM or 24:00 time base.
4. If 12:00 AM PM time base selected, A or P flashes.
press MODE (M) button to select A (AM) or P (PM).
5. Press SET (S) button to change hour.
6. Press MODE (M) button to switch to minute (minute flashes).
7. Press SET (S) button to change minute.
8. Press MODE (M) button.
