-
There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.
Matching Homeycomb Pattern Grille Vent for Right Side
- Thread starter obiwan57
- Start date
taxmyzer
New member
Modded the one for the 2014. It fits with minor alteration and costs less than the ones offered by sponsors. I have it on my 2013 RT-S.
Bob Denman
New member
I think that ESI has about the closest match..:2thumbs:
http://www.esicycleproducts.com/spyderrtventcovers.html
http://www.esicycleproducts.com/spyderrtventcovers.html
Last edited:
IdahoMtnSpyder
Active member
Buy one for a 2014, $18 I think, and do some cutting on it. It then fits perfectly. See my thread here:
http://www.spyderlovers.com/forums/showthread.php?69303-My-upper-heat-block-mod
ThreeWheels
Active member
I bought the ESI and never liked it. I wound up taking the left side grill that I got with the oil panel campaign and made major mods to it so it fit.
As others pointed out, with the advent of the 2014 year model you can get the right grill directly from BRP and make that fit will little modifications.
Definitely a better way to go.
As others pointed out, with the advent of the 2014 year model you can get the right grill directly from BRP and make that fit will little modifications.
Definitely a better way to go.
StanProff
New member
I ordered and installed the '14 on my '10 (that I just traded). It was like only 25 dollars at the dealer. The Grill and bottom block off is molded together. I simply cut the bottom off of it and installed the grill. I then used the bottom I cut off and fashioned a air deflector for the right foot. See the Pic. I also reinstalled the block off plate behind the grill.
Last edited:
Bob Denman
New member
:nopic: of your mods?? :2thumbs:
Magdave
New member
jcthorne
Well-known member
Just FYI, I installed the 2014 grille without any added insulation or any trimming. It fits as delivered. My radiator exhaust is now ducted down rather than out the side. Not really anything to take pics of, it looks exactly like a 2014 in that area.....Other than the body work is a beautiful shade of blue which is not available in 14 or 15.
obiwan57
New member
Do you happen to have the part number?
obiwan57
New member
Thank you!!!
3 Wheel Addict
New member
I got one already cut off that i'll sell you. I had this on my 13 RTS till I moved up to a 14 RTS. Lay it in place and drill the two holes where the plastic rivets are snap in place and your done! Some are leaving the bottom section on but I chose not to block the cooling outlet off so that's why its cut off. $26.00 bucks will put it at your door (lower 48) if your interested.
Attachments
Similar threads
