Looking for hand guards ( the less expensive kind )

[GoandChase]

Starting to get a little chilly and was thinking about finding some hand guards to try and keep the fingers a little warmer this winter. Any ideas that would be less expensive than the OEM two part setup? Tons of hand guards listed on ebay but I'm not sure what would fit our Rykers. Thanks for the help.

 

[BLUEKNIGHT911]

I would look at what ….DENNISKIRK.COM HAS TO OFFER ….. they have a dirt bike & snowmobile section - lots of choices …. & check what E-bay has ….. Mike hyea:

 

[canamryder]

Use a good pair of MITTENS instead.

 

[Highwayman2013]

Something like this should work. https://www.amazon.com/Bro-Universa...jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

 

[BLUEKNIGHT911]

Something like this should work. https://www.amazon.com/Bro-Universa...jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

I looked at those, … my concern would be …..CAN THOSE BE MOUNTED on our handlebars …… I've seen ones that have a clamp type system, that would keep the OEM hand warmers …… just a thought ………….. good luck …. Mike hyea:

 

[Highwayman2013]

It’s a Ryker, no heated grips.

 

[RICZ]

Take your pick from this page.......
https://www.banggood.com/search/motorcycle-hand-guards.html?from=nav

 

[Nobodyjj]

Snowmobile gloves...have worked for years!

 

[Mikey]

I use a good set of polar flease gloves in the spring and fall here in Maine!!! But I use the same thing snowmobiling also, and my RTL and sleds all have handwarmers! Or like Mike said go to a bike or sled shop they will have a good selection of bolt on guards. I would find some thing that is on the wide side that wrap the hand! Good Luck

 

[chris56]

if you calculate the price of the Can-Am delux fairing its maybe "cheaper" .. you get

handguards - GPS mounting - drink-holder - three different windshields and space for speakers, voltmeters aso .. in three different colours !!
& you can "clip" it off without any tools, if you don`t need it .. a really intelligent product !!

https://www.youtube.com/watch?v=gtQsis3FES4&t=40s

 

[Mikey]

if you calculate the price of the Can-Am delux fairing its maybe "cheaper" .. you get

handguards - GPS mounting - drink-holder - three different windshields and space for speakers, voltmeters aso .. in three different colours !!
& you can "clip" it off without any tools, if you don`t need it .. a really intelligent product !!

https://www.youtube.com/watch?v=gtQsis3FES4&t=40s

That IS COOL!!!!:clap:

 

[Markubis]

if you calculate the price of the Can-Am delux fairing its maybe "cheaper" .. you get

handguards - GPS mounting - drink-holder - three different windshields and space for speakers, voltmeters aso .. in three different colours !!
& you can "clip" it off without any tools, if you don`t need it .. a really intelligent product !!

https://www.youtube.com/watch?v=gtQsis3FES4&t=40s

Doesn't it require a different set of handlebars though?

 

[Highwayman2013]

Need a link. Or a part number.

 

[chris56]

you can use the handlebars of all these outlander Models here on their website... mine are from an old Aprilia Mille - there are some superbike handlebars that also should fit - maybe you speak with your dealer, you have also to make two holes for the grips and a solution how to open the lid of the glovebox... the pics show the sport and the large screen for it.

https://www.brppartshouse.com/oemca...deluxe-fairing-for-g2-except-x-mr-amp-6x6-g2l

 

[SamN44]

How about these? A guy on Facebook said they worked great.

https://www.amazon.com/dp/B001Q4YMX...olid=2ZWQDOPPENU6A&psc=1&ref_=lv_ov_lig_dp_it

 

[GoandChase]

Thanks for all the ideas. Can't seem to find just what I'm looking for so will be going with better gloves to start the cold season with. For everyone still riding be safe out there. For everyone else.. hang in there and remember tomorrow is one day closer to warm weather.

 

[RICZ]

If not suggested before, Cycle Gear's Freeze-Out glove liners, as well as the other underliners, work well. You can feel your hand warming as soon as you put them on.

 

[BLUEKNIGHT911]

Thanks for all the ideas. Can't seem to find just what I'm looking for so will be going with better gloves to start the cold season with. For everyone still riding be safe out there. For everyone else.. hang in there and remember tomorrow is one day closer to warm weather.

These will keep your hands toasty …. insulated, wind, waterproof MITTS …. go to DENNISKIRK.COM …( snowmobile catalog ) .. I used to wear them while snowmobiling, now I only downhill ski …. I have attached them to my ski poles, and have skied at 10-15 below, without getting cold. Yes the wind is only 30 mph, but that's enough to wick heat from your gloves. With the MITTS, I don't feel it..… If it wasn't for the MITTS I would have to give up skiing because of Frostbite issues ….. Mike hyea:

 

[JimH]

I talked with a guy who had these - he said they were really good.
https://www.hippohands.com/

 

[cueman]

I have these and like them. An issue that I see for the Ryker is the mirrors. :gaah: cueman