• There were many reasons for the change of the site software, the biggest was security. The age of the old software also meant no server updates for certain programs. There are many benefits to the new software, one of the biggest is the mobile functionality. Ill fix up some stuff in the coming days, we'll also try to get some of the old addons back or the data imported back into the site like the garage. To create a thread or to reply with a post is basically the same as it was in the prior software. The default style of the site is light colored, but i temporarily added a darker colored style, to change you can find a link at the bottom of the site.

Locked keys in frunk

Take the left side cover off an you can stick your hand up were the cable locks the lid an pull on the latch to get it to open. It's hard but that's the way I had to open mine. ST Hope this helps.:thumbup:
 
Bummer..!!

being an RSS you could reach the cable pulling the oil access panel. Then I carry two keys. One in my pocket and one around my neck. To easy to put one in your coat pocket then put the coat in the frunk...:thumbup:
 
I went to my local locksmith and had a non chip key made ( Chrysler ) and put yhr key part in the foam and then duck taped the top to the right inside part of the the side panel just what I did and key I got if you need size of key ( key code) to order from locksmith pm me and ill give it to you
Good luck
Brady
 
Duct Tape is good... :thumbup:
But it won't last forever! :shocked:
You might want to consider something a bit more permanent...
 
WELLLLLLLLLLLLLLLLLLLLLLLL!!!

Bob Denman said:
Duct Tape is good... :thumbup:
But it won't last forever! :shocked:
You might want to consider something a bit more permanent...
Click to expand...
:lecturef_smilie: :gaah:.....Bob, if it's " PERMANENT "....then you won't be able to get it off to use it either :dontknow: :roflblack: :roflblack: :roflblack: :roflblack: :roflblack:....Mikeguyver :thumbup:
 
spare key

bradyb6599 said:
I went to my local locksmith and had a non chip key made ( Chrysler ) and put yhr key part in the foam and then duck taped the top to the right inside part of the the side panel just what I did and key I got if you need size of key ( key code) to order from locksmith pm me and ill give it to you
Good luck
Brady
Click to expand...


I sent (tried to send) you a pm for the key code....did you get it?
 
Frunk Opened

Removed the upper side panel and ever so lightly tugged on the cable and BAM the frunk opened right up. Thanks Lamont for the tip. :yes::yes::yes:
 
Key blank

I put my ISP key in the helmet not thinking and put in the frunk,had to call a locksmith to pic the lock.....since then had 2 key blanks made I bought ILCO X270 had to purchase a pack of 10 on Amazon. They work great to unlock but not to start. Anyone want one have 6 left @ 2.00 each. Send me PM for address...I have 2012 RTS by the way
 
I don't use a blank

I used a choke cable for a small engine and placed the end under the left side oil panel the other end is secured to the locking mechanism. I often place both keys in the frunk when I am at an event or someplace I want the bike locked up. I get done with what I am doing, pop the panel off, pull the choke cable and the frank pops up. Now this is just between you and I right?:shocked:
 
You must log in or register to reply here.

Similar threads

kdunaway
How do I go about getting new keys for my 2014 Spyder RT? Is there any way to get into a locked rear trunk?
Replies
7
Views
421
kdunaway
kdunaway
troop
Wrapping/striping a frunk with matte or denim paint - Results?
Replies
9
Views
685
troop
troop
Dasmoetorhead
What's in your saddle bags and frunk?
2
Replies
27
Views
3K
shakin_jake
shakin_jake
Martin Slovakia
You will LOVE or HATE this - How to open your locked Frunk without the key!
Replies
10
Views
1K
Martin Slovakia
Martin Slovakia
C
09 Spyder GS lost key - is it possible to program new keys to the Spyder?
2
Replies
36
Views
2K
cobramadness
C
Back
Top