UtahPete
Well-known member
The RT is about 1200#.That could work.
I don't know the overall weight of the RT. My F3S is around 900#, with less than half of that on the rear.
Not sure how long the axle is though. If it fits, it would probably work, but you probably need some ass to lift it with that.
The lift is rated at 1500# and has no trouble lifting the entire bike. No ass required. This rig lifts the rear of the bike only, which is around 400#, less than 1/3 of the lift capacity.
My arrangement lifts by the swing arms, as noted in the thread name and extensively throughout, including the pictures.
The length of the axle does not factor into it at all, so I'm not sure why you mention it, unless you're talking about the spread between the swing arms.
Last edited:
