Jacket Armor Question

[newbert]

I just bought this jacket (https://www.amazon.com/gp/product/B00CFAERBQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1), and like it a lot. However, although it's got solid armor in the shoulders and elbows, the protection on the back seems a little weak in comparison.

Is it possible to get stronger armor protection to slip into the back of the jacket? If so, how do you size it and where do you order it from?

Thanks!

 

[UtahPete]

I just bought this jacket (https://www.amazon.com/gp/product/B00CFAERBQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1), and like it a lot. However, although it's got solid armor in the shoulders and elbows, the protection on the back seems a little weak in comparison.

Is it possible to get stronger armor protection to slip into the back of the jacket? If so, how do you size it and where do you order it from?

Thanks!

The back protector is 'articulated triple density' ... can't imagine why you'd need anything more than that or where you would find it.

 

[newbert]

The back protector is 'articulated triple density' ... can't imagine why you'd need anything more than that or where you would find it.

....Because it feels like nothing more than a thin foam pad to me. :dontknow: Unlike the shoulder and elbow pads which have a solid component to them.

Maybe I'm over-thinking things?

Thanks.

 

[Bob Denman]

:agree: The various pieces of armor are designed to take the hits that they are most likely to get. nojoke
None of them will protect you against all types of hits: all of the time!
You also need to remember that you probably couldn't pick up and wear a jacket, that could! :shocked:

 

[Navydad]

IT is nothing but a thin foam pad and you can do better. Google CE Protective Armor and you will have lots of choices in armor and places to purchase.

 

[HayRog]

Or,

https://www.revzilla.com/product/tour-master-replacement-back-protector

Lots of them out there on the web

 

[UtahPete]

:agree:

The various pieces of armor are designed to take the hits that they are most likely to get. nojoke
None of them will protect you against all types of hits: all of the time!

 

[Slowpoke387]

Yes there are MUCH better back protectors made of hard plastic armor, and some that are made of a flexible honeycomb material that disperses impact pressure out there that you can either put on under the jacket or slip into the jacket itself. The ones that you wear are better because they usually extend down for some tailbone protection too. And yes that foam is useless and will do nothing for you. Anyone saying you dont need more than that has obviously never hit the deck before and slid into something along the way.
I will do a search for some links for you, although the Revzilla one mentioned above is a good starting point.

 

[UtahPete]

Anyone saying you don't need more than that has obviously never hit the deck before and slid into something along the way.

Mostly true. I did crash a Honda 450 on an exit ramp with an oil slick back in the 70s. Broke my elbow since I was not wearing any armor protection (nonexistent back then except for racers). Never had reason to think that if I crash the Spyder I will need back protection though.

 

[ARtraveler]

Good subject. Most of jackets and pants I buy come with assorted, installed pads. The never totally cover the area they are supposed to protect for me. I therefore remove the stuff and have a full box of it.

I wear leather most of the time now--even though I know that is not perfect.

I have two pair of Kevlar jeans and the lining, although not thick, is supposed to protect from the garment tearing. Have never had to put them to the test though.

Most important to me are a good helmet, boots, and gloves.

My .02 :thumbup:

 

[JerryB]

Hi Slowpoke,

Re: I will do a search for some links for you, although the Revzilla one mentioned above is a good starting point.

Please do as the link on the Revzilla site says:

MD (out of stock)

LG ( out of stock)

No Restock

Jerry Baumchen

PS) Talk about timing on this subject. I came out of the restaurant this morning, began to put my First Gear jacket on & realized that the back protection had shifted. Took the jacket off, unzipped the access & found a piece of foam about 3/8" ( 10 mm ) thick. I would be interested in something better to install along with the foam.

 

[the2pid1]

Toss the foam and buy the CE elbow, shoulder and back pieces.

 

[asp125]

A lot of garment makers use a softer armor for the back, even premium brands. Not sure why, perhaps comfort, perhaps fear of lawsuits from back injuries due to hard armor? Dunno. AFAIK only race organizations require hard back armor, they know a thing or two from experience. Luckily there are many retro fit options available. Some, like D3O are soft under normal conditions but stiffen up upon impact. Others are soft like Forcefield but meet CE level2 certification for back protection.

 

[KX5062]

The best newer armor on the market is the D30 armor line up.

Their claim:
An advanced, patented polymer, CE-rated D3O® impact protectors are the latest advancement in protective armor. D3O® impact protectors utilize intelligent molecules that lock together on impact. Because of this, the impact protector can be made thinner and lighter, making a jacket more comfortable and easier to wear. However, this decreased size does not come at the expense of impact protection.


​The reactive armor is the cat's meow.

 

[dndfindley]

Good subject. Most of jackets and pants I buy come with assorted, installed pads. The never totally cover the area they are supposed to protect for me. I therefore remove the stuff and have a full box of it.

I wear leather most of the time now--even though I know that is not perfect.

I have two pair of Kevlar jeans and the lining, although not thick, is supposed to protect from the garment tearing. Have never had to put them to the test though.

Most important to me are a good helmet, boots, and gloves.

My .02 :thumbup:

Forgive me for saying this but I do so not to insult but to educate. If you remove your pads you are a fool. You should dress for the slide and not for the ride. Just because you are less likely to hit the asphalt due to being on 3 wheels doesn't mean it will not happen or that it hasn't happened before to others. Kevlar jeans will protect only in a slow speed slide (less than 30 mph) and have no impact protection. A full face helmet, motorcycle boots and gloves will protect your head, ankles and hands, but that leaves the great majority of your body unprotected. I'm sure most everyone here is familiar with ATGATT and I am a firm believer. I wear full coverage on ALL rides regardless of length. I have armor protecting the forearms, elbows, shoulders, back, chest, hips, tailbone, thighs, knees and shins. Oh, and I also wear a full face helmet, gloves with padded leather palms and hard knuckle protection as well as high boots made for riding. It does get hot sometimes but there's another old saying that is still true: I'd rather sweat than bleed.

 

[dndfindley]

I just bought this jacket (https://www.amazon.com/gp/product/B00CFAERBQ/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1), and like it a lot. However, although it's got solid armor in the shoulders and elbows, the protection on the back seems a little weak in comparison.

Is it possible to get stronger armor protection to slip into the back of the jacket? If so, how do you size it and where do you order it from?

Thanks!

You want real protection? Go here: https://www.bohn-armor-pants.com/catalog/

 

[retread]

I second the Bohn post, jackets, all kinds of other armored clothing.

john

 

[ARtraveler]

Forgive me for saying this but I do so not to insult but to educate. If you remove your pads you are a fool. You should dress for the slide and not for the ride. Just because you are less likely to hit the asphalt due to being on 3 wheels doesn't mean it will not happen or that it hasn't happened before to others. Kevlar jeans will protect only in a slow speed slide (less than 30 mph) and have no impact protection. A full face helmet, motorcycle boots and gloves will protect your head, ankles and hands, but that leaves the great majority of your body unprotected. I'm sure most everyone here is familiar with ATGATT and I am a firm believer. I wear full coverage on ALL rides regardless of length. I have armor protecting the forearms, elbows, shoulders, back, chest, hips, tailbone, thighs, knees and shins. Oh, and I also wear a full face helmet, gloves with padded leather palms and hard knuckle protection as well as high boots made for riding. It does get hot sometimes but there's another old saying that is still true: I'd rather sweat than bleed.

Ouch! I guess you told me. :roflblack::roflblack:

I have been around awhile, owned lots of motorcycles and spyders, and have hundreds of thousands of miles of riding experience. I am not going to dress like the Michelin Man. I know the risks and am willing to take a few. I do feel I dress for the slide--but nothing is perfect. :dontknow::dontknow: I consider my gear to be ATGATT--such as it is.

 

[Spyder 42]

I bought a D3O upgraded back pad for the FirstGear Jaunt jacket that I bought (xl for sale) and a Bohn for the 'Stitch. Now I just have to get healthy enough to ride.

 

[Pirate looks at --]

Forgive me for saying this but I do so not to insult but to educate. If you remove your pads you are a fool. You should dress for the slide and not for the ride. Just because you are less likely to hit the asphalt due to being on 3 wheels doesn't mean it will not happen or that it hasn't happened before to others. Kevlar jeans will protect only in a slow speed slide (less than 30 mph) and have no impact protection. A full face helmet, motorcycle boots and gloves will protect your head, ankles and hands, but that leaves the great majority of your body unprotected. I'm sure most everyone here is familiar with ATGATT and I am a firm believer. I wear full coverage on ALL rides regardless of length. I have armor protecting the forearms, elbows, shoulders, back, chest, hips, tailbone, thighs, knees and shins. Oh, and I also wear a full face helmet, gloves with padded leather palms and hard knuckle protection as well as high boots made for riding. It does get hot sometimes but there's another old saying that is still true: I'd rather sweat than bleed.

If indeed your motive is to educate and not insult, perhaps you could avoid the word "fool" in your second sentence. It didn't make you sound any more intelligent!