Installing used exhaust

[Demndawg]

I got an awesome deal on a two brothers dual carbon fiber exhaust system. The main parts are still attached but other than that’s there is no hardwear with the kit. My question is can i reuse hardwear from the stock system such as bolt said and spring? Also, when connecting 5e system to the header pipe I should this where i would put the Honda y gasket that I’ve seen so much talk about? If so, does anyone know the exact part number? And lastly, I swear, ive heard that replacing header gaskets could help with the heat issue so should I go ahead and do this while erything is off? I’m going to try and post pics of new system so you can see what im working with. Hope I can do it right this time.

So still can’t post pics. It keeps telling me it’s invalid even though it’s a png file straight from my library.:banghead:

 

[Peter Aawen]

.......So still can’t post pics. It keeps telling me it’s invalid even though it’s a png file straight from my library.:banghead:

If all else fails, load the image directly from your phone or tablet camera by clicking on 'Manage Attachments' under Attachments in Additional Options below the post reply text field; then Add File, Choose File, & finally Camera (or if you already have it as an image file, My Files. ) Once you've taken a new pic or chosen an existing file, click on Done (or OK) then Upload, Insert Image (& repeat the choose file thing for any other images you want to add until you are happy!) & then finally click on Done before finishing your text entry & submitting the reply. :thumbup:

Oh, and you probably can use the old hardware, if it's in good nick.

 

[Yazz]

I got an awesome deal on a two brothers dual carbon fiber exhaust system. The main parts are still attached but other than that’s there is no hardwear with the kit. My question is can i reuse hardwear from the stock system such as bolt said and spring? Also, when connecting 5e system to the header pipe I should this where i would put the Honda y gasket that I’ve seen so much talk about? If so, does anyone know the exact part number? And lastly, I swear, ive heard that replacing header gaskets could help with the heat issue so should I go ahead and do this while erything is off? I’m going to try and post pics of new system so you can see what im working with. Hope I can do it right this time.

So still can’t post pics. It keeps telling me it’s invalid even though it’s a png file straight from my library.:banghead:

You should be able to reuse the bolts and spring. Be careful screwing the O2 sensor back in.

I think a header gasket and Y gasket are the same thing, BRP calls them slip joints. After about 2k miles they burn out, thus the heat. The Honda Y gaskets last much longer. I've got 50k on mine and they're still good. Get two, for both header pipes. The part number is 18392-MAM-000.

 

[Demndawg]

You should be able to reuse the bolts and spring. Be careful screwing the O2 sensor back in.

I think a header gasket and Y gasket are the same thing, BRP calls them slip joints. After about 2k miles they burn out, thus the heat. The Honda Y gaskets last much longer. I've got 50k on mine and they're still good. Get two, for both header pipes. The part number is 18392-MAM-000.

Thanks for the info on Specific part number. Ordering now.
And Peter, I tried exactly what you said but for some reason I am still getting a very long invalid code after I hit upload. The only thing I can figure I should that I’m using wi-fi here at the hospital and it Maynard be restricting me. I’m going to try again in a bit after turning the wi-fi off on my phone and use 4g.