Installed KewlMetal Peg Mounts

[Sara]

--------I had plactic all over the garage---took me about 5 hours, but I got the peg mounts installed, and they are as solid as a rock---now I'll find a good set of foot pegs----I'm impressed with the KewlMetal organization so far-----I've read so negative criticisim----but I had a good experience. The foot supports that I formed and installed fit in with the mounts very well----Ready for a good trip----weather is behaving too.

 

[vwatso]

re

5 Hours did you pull the motor out?

 

[Sara]

Wasn't------

-------that the way to do it????

 

[effgjamis]

5 Hours did you pull the motor out?

Now Now..... :joke::joke::joke:

....................................
great job Sara.

 

[SpyderByter]

yea don't let vwatso rib ya. Great job. Always better to accomplish it yours4elf even if it takes longer than some of these master mechs. I had the platic off my machine all winter and slowly, very slowly, got oil changed, risers, mirror extensions, rear shock cover and a spider web installed. Next Winter, I attack the highway pegs, or most likely floor boards, maybe some hard luggage.

Your right about Kewlmetal. I myself was getting frustrated trying to contact them, and that seems to be the biggest complaint. The products are good and worth the wait. Once I got a hold of Hilda, she explained the parts may take a while, but they came in quicker than she estimated. Email seems to be the best way to contact them.

 

[rc51ny]

How about some pics of the install?? ray:

 

[ataDude]

.
Sara... I've posted this before but if you're going to work on the Spyder, get one of these. Add the #30 Torx bit to the reversible Dremel driver, and all panels can be installed or removed in 10 minutes.

.

 

[vwatso]

re

Sara,

I was just kiddding on engine part and timing. Thought I clicked in the:joke: tab, but I see now I did'nt! I have the KEWL highway mounts myself and enjoy the extra comfort they provide. Keep up the great work. Let me know if you need anything in the future?

Thanks,
vwatso

 

[Sara]

I know---------

----------------I enjoy a quick wit------Now I'm looking for some foot pegs that are about 8" long----simple, round and rubber covered. I got a nice, short set today for $10.00, but the are about 5" long. How do I place pictures on this forum??----I'm a bit challenged by computer operations''''''''Thanks.......SSSS

 

[Lamonster]

----------------I enjoy a quick wit------Now I'm looking for some foot pegs that are about 8" long----simple, round and rubber covered. I got a nice, short set today for $10.00, but the are about 5" long. How do I place pictures on this forum??----I'm a bit challenged by computer operations''''''''Thanks.......SSSS

http://www.spyderlovers.com/forums/showthread.php?t=8044

 

[0228lisa]

.
Sara... I've posted this before but if you're going to work on the Spyder, get one of these. Add the #30 Torx bit to the reversible Dremel driver, and all panels can be installed or removed in 10 minutes.

.

Good to know. A friend of mine who has a body shop said if I bring him the red panels, he wil paint the phantom black for free for me. Yes...he's a good friend.

 

[spy08]

thank

.
Sara... I've posted this before but if you're going to work on the Spyder, get one of these. Add the #30 Torx bit to the reversible Dremel driver, and all panels can be installed or removed in 10 minutes.

.

atadude, I noticed your post about the dremel driver last week and picked one up. I got to admit it is very handy and compact. thanks again :thumbup:

 

[ataDude]

No problem.

atadude, I noticed your post about the dremel driver last week and picked one up. I got to admit it is very handy and compact. thanks again :thumbup: