Install spy-vent-cweb

[Doug]

When removing the panel cover housing the radiator, to install spy-vent-cweb cover on a st-limited, I have removed three external bolts or screws, but the forth inside one not sure how to remove that one, anyone, be nice.

 

[SNOOPY]

If I can remember correctly, I think one of the panels underneath has to come off...and the big lower side panel as well, because where they intersect they cover entry to that bolt.

If we are speaking of the same panel and same hidden bolt.

 

[Doug]

diff panel

If I can remember correctly, I think one of the panels underneath has to come off...and the big lower side panel as well, because where they intersect they cover entry to that bolt.

If we are speaking of the same panel and same hidden bolt.

the panel I'm referring to houses the radiator fan and and the opening does not have a vent cover

 

[quickster47]

Give us a picture because I too am not sure which one you are questioning.

Carl

 

[jerpinoy]

The owners manual have the procedures how to remove certain panels.

 

[Doug]

Give us a picture because I too am not sure which one you are questioning.

Carl

 

[cuznjohn]

picture

now looking at that picture i would say if someone made a cover to encase the radiator and fan and had it so it vented towards the bottom of the bike i really think it would help the heat problems but than again when not moving the heat would go under the bike and right up under the engine

 

[quickster47]

After you remove the three torx head screws from that panel it is then free to be lifted out. There are a couple of tabs at the bottom of the panel that fit into the lower piece but there are only three screws securing it. It is just like the oil change side, the left side panel, that only has the three Dzus fasteners.

Carl

 

[Doug]

After you remove the three torx head screws from that panel it is then free to be lifted out. There are a couple of tabs at the bottom of the panel that fit into the lower piece but there are only three screws securing it. It is just like the oil change side, the left side panel, that only has the three Dzus fasteners.

Carl

Thank you